HP Probook 635 Aero G7 Endpoint Security Controller Problem

[alfredodinolfo]

HP Probook 635 Aero G7
ProdID: 2W8R7EA#ABZ
SN: 5CG10171VK
mb code: LINDEN 6050A3147201-MB-A01
.

Thank you

[SMDFlea]

Re: HP Probook 835 G7 Endpoint Security Controller Problem

mb code LINDEN 6050A3147201-MB-A01
.

Thank you

Read the updated rules,you must post the laptop serial number

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570

.

[alfredodinolfo]

Re: HP Probook 835 G7 Endpoint Security Controller Problem

Read the updated rules,you must post the laptop serial number

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570

.

Sorry

[hoaca388]

Re: HP Probook 835 G7 Endpoint Security Controller Problem

Sorry

HP ProBook 635 Aero G7 Notebook PC (182W0AV)

[alfredodinolfo]

Re: HP Probook 835 G7 Endpoint Security Controller Problem

HP ProBook 635 Aero G7 Notebook PC (182W0AV)

work thank you

[alfredodinolfo]

Re: HP Probook 835 G7 Endpoint Security Controller Problem

HP ProBook 635 Aero G7 Notebook PC (182W0AV)

sorry, now no end point but is in MPM mode and no serial on bios information. I tried to write with HP BIOS Configuration Utility sp143621.exe but no chance to write information sn etc.
can you help me?

[Matteo Setti]

Hi, I have a problem with the "endpoint security controller problem" error.

Can someone help me?

I am attaching the Bios file in the attachment

HP ProBook 635 Aero G7
SN# 5CG10171CO


Thanks

[dgs3342]

Re: HP Probook 835 G7 Endpoint Security Controller Problem



HP ProBook 635 Aero G7 Notebook PC (182W0AV)

works fine! Thank you

[Matteo Setti]

Hi, can I also use the bios reported by hoaca388 in post #4? Do I need to do any work after flashing the chips?
Thanks

[Matteo Setti]

Hi, I dumped bios and EC.

Can someone help me?

HP ProBook 635 Aero G7
SN# 5CG10171CO

[alfredposadas09]

Hi, I dumped bios and EC.

Can someone help me?

HP ProBook 635 Aero G7
SN# 5CG10171CO

there is a problem in ur file

[Matteo Setti]

Are these ok ?

[alfredposadas09]

Are these ok ?

just program u368

first boot press f10 go to bios setup and reset the settings to default

[Matteo Setti]

It doesn't work, the caps lock led flashes 7 times, as it did before

[Matteo Setti]

I have no idea if this could be a problem, I noticed that the SN# code is 5CG10171C0 and not SN# 5CG10171CO, With the final zero and not with the O

Thanks

[Matteo Setti]

Any suggestions?

[Matteo Setti]

Hi, I tried to update the bios of u368 as suggested by alfredposadas09 in post 13, but without success. The Probook Aero 635 G7 doesn't start and flashes 7 times. I think the EC firmware is also corrupt. Anyone have any suggestions?

I suspect that the EC firmware is corrupt because the first bytes are set to 00 instead of FF as the ECs I see usually are. See post #12

[alfredposadas09]

Hi, I tried to update the bios of u368 as suggested by alfredposadas09 in post 13, but without success. The Probook Aero 635 G7 doesn't start and flashes 7 times. I think the EC firmware is also corrupt. Anyone have any suggestions?

I suspect that the EC firmware is corrupt because the first bytes are set to 00 instead of FF as the ECs I see usually are. See post #12

just put back the original firmware and the laptop will start again

[Matteo Setti]

just put back the original firmware and the laptop will start again

actually no, because with the old firmwares the HP Probook only rarely started and the few times it started it showed the controller problem. I'm thinking of a more drastic solution by changing bios and ec, but I don't know how to do it

[alfredposadas09]

actually no, because with the old firmwares the HP Probook only rarely started and the few times it started it showed the controller problem. I'm thinking of a more drastic solution by changing bios and ec, but I don't know how to do it

try this .. make sure u dont switch the bios chips otherwise it wont work