alfredposadas09 thanks to your firmware I managed to resurrect the laptop!
I made several attempts and solved that with a more precise soldering of the EC chip.
I still have a problem with the (Italian) keyboard, which now doesn't recognize some keys (enter, T, Y, Z, X), could it be due to the firmware?
Once bitlocker was disabled I also installed the new firmware of HP 01.16.
Matteo Setti
Member
Last Activity: 05-07-2024, 12:37 PM
Joined: 04-01-2024
Location: Venezia
-
Thanks alfredposadas09, but even the latest firmwares were not conclusive. The caps lock button keeps blinking 7 times every time I try to press the power button. With HxD I tried to see the new versions of the firmware you shared with me, but I didn't understand the changes you made....Leave a comment:
-
actually no, because with the old firmwares the HP Probook only rarely started and the few times it started it showed the controller problem. I'm thinking of a more drastic solution by changing bios and ec, but I don't know how to do it...Leave a comment:
-
Hi, I tried to update the bios of u368 as suggested by alfredposadas09 in post 13, but without success. The Probook Aero 635 G7 doesn't start and flashes 7 times. I think the EC firmware is also corrupt. Anyone have any suggestions?
I suspect that the EC firmware is corrupt because the first bytes are set to 00 instead of FF as the ECs I see usually are. See post #12Leave a comment:
-
Any suggestions?Leave a comment:
-
I have no idea if this could be a problem, I noticed that the SN# code is 5CG10171C0 and not SN# 5CG10171CO, With the final zero and not with the O
ThanksLeave a comment:
-
It doesn't work, the caps lock led flashes 7 times, as it did beforeLeave a comment:
-
Are these ok ?...Leave a comment:
-
Hi, I dumped bios and EC.
Can someone help me?
HP ProBook 635 Aero G7
SN# 5CG10171CO...Leave a comment:
-
Hi, can I also use the bios reported by hoaca388 in post #4? Do I need to do any work after flashing the chips?
ThanksLeave a comment:
-
Hi, looking to learn thow to repair some thingsLeave a comment:
-
Hi, I have a problem with the "endpoint security controller problem" error.
Can someone help me?
I am attaching the Bios file in the attachment
HP ProBook 635 Aero G7
SN# 5CG10171CO
Thanks
...Leave a comment:
No activity results to display
Leave a comment: