So after much trying I managed to read one chip and it was 16 mb. The other one I can't read at all. It's in the list of NeoProgrammer though. I don't know if my chip reader is bad or if the clips I'm using are a problem.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>>click on this link to donate via PayPal.<<<<<
Every donation made will go towards server fees and maintenance costs. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Unfortunately it didn't fix the laptop. I'll continue troubleshooting.
But I am curious how you were able to transfer the DMI. Any guide on that or a few words if it's a simple process?
Thanks agian!
You're welcome.
Your DMI is inside the 16MB file, starting from offset (40000h) till (44000h).
Is already encrypted but in your case there is no need to decrypt it, you can just copy it from the old file to the new one.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>>click on this link to donate via PayPal.<<<<<
Every donation made will go towards server fees and maintenance costs. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Your DMI is inside the 16MB file, starting from offset (40000h) till (44000h).
Is already encrypted but in your case there is no need to decrypt it, you can just copy it from the old file to the new one.
Comment