Thanks for the information, I assumed you could expose the chip without dismantling the laptop which I assume you have to do in removing the board to unsolder the chip and just use the scissor clip to read the BIOS that way. This is a longer process that I thought, I'll post on here again as soon as I can do that. Unfortunately last year I misplaced my soldering station after a move and don't have a great setup for working on stuff at the moment.
Again, thanks a lot I might've made a huge mistake otherwise and rushed through the process
-
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow
Leave a comment:
-
-
peste
Do you need this pulled with a CH341A? Just to verify, the software pull earlier won't work? Thanks!
Leave a comment:
-
-
Hi guys, I need a BIOS password like everyone else who buys a used Getac and support is giving me the runaround unless I give them $200+.
It's a B300G5
Serial number on the Getac label is cut out/removed but there are 2 others: 2508-504058 & RF739B0396
number under the Data matrix code: 2428628A0002
Qm87 chipset
Intel HD4600
i5-4300M
Leave a comment:
-
-
-
Hello, I’m struggling to get past supervisor password on this laptop as well. Thanks!
SN: RGA51B0222Leave a comment:
-
Thank you very much for the work done. The laptop works, there is no password anymoreLeave a comment:
-
-
Hello ! I need password for my laptop bios.
Model Getac B300G5
Serial Number RE763B0401
Thank you in advance for your help. Best regards, AndreyLeave a comment:
-
Re: Getac B300 G5 Bios Password
You must post the laptop serial number,as per the rules .
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570
Also,bios requests go in a seperate sub forum.Your thread has been moved.
Reminder: rules and organization of this section - https://www.badcaps.net/forum/showthread.php?t=117483
.Last edited by SMDFlea; 10-25-2023, 05:48 AM.Leave a comment:
-
Getac B300 G5 Bios Password
Hello Everyone.
Need Help From Knowing People, Who Can Generate Bios Password For Locked Laptop: Getac B300 G5.
It Give 3 Try For Enter Correct Password And Hint For Unlock Key.
As I Can See, There Is Persons In The Net, Who Can Give Generated Key For Bios.
I Have Add Screen With This Number:
Thanks For Help!
Serial Number: RE763B0401Attached FilesLast edited by Ole82; 10-25-2023, 05:50 AM. -
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello,
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries... -
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set.... -
Hello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but...
Leave a comment: