Bios request HP 15-p076sa

[Calgacus]

Hi

Looking for a working bios for the following

HP 15-076sa Laptop

Getting capslock 2 flash possible corrupt bios

I have removed the chip and attached a dump

Thankyou in advance

Paul

[SMDFlea]

Re: Bios request HP 15-076sa

Hi

HP 15-076sa Laptop

15-?076sa Post the full laptop model number please ,and the serial number

.

[Calgacus]

Re: Bios request HP 15-076sa

Sorry

15-P076sa
SN:5CD43979CT

Thanks

[Vesko356]

Re: Bios request HP 15-076sa

HP Pavilion 15-p076sa Notebook PC bios version F.57 Rev.A
Your BID is 0227D

D 75E000 - 75EFFF
W 450000 - 45003F

[SMDFlea]

Re: Bios request HP 15-p076sa

The DMI can be added from your backup to the new bios using a hex editor. Vesko has given the hex offsets. If you can`t use a hex editor have a look at some of the guides in the forum,or you can use the attached script to add it automatically,.see the README text file for the instructions.
.

[Calgacus]

Re: Bios request HP 15-p076sa

Hi guys

Thanks for the fast reply,
I can use hex editor to copy the data from those addresses in my dump to a new bios file no probs.
Flashing bios with chip off is not something i do regualarly im affraid, but have revived a few over the years. So i dont understand everything yet

I'm lost with the X5 files supplied by Vesko356, do they need combined, am i just using the one referenced with my BID 0227D a wee point in the right direct and i will get it guys i promise.

[Vesko356]

Re: Bios request HP 15-p076sa

I'm lost with the X5 files supplied by Vesko356, do they need combined

No, these are different board ID (BID) versions for different variations under this model/platform. Your BID as I mentioned is 0227D so use the archive with that name only, just transfer DMI/Windows key from your dump to the 0227D.bin using offsets mentioned or use the script attached in SMDFlea's post to add it automatically.

.

[Calgacus]

Re: Bios request HP 15-p076sa

Thanks guys

Blocks written to new bios and reflashed,resolder and it's back to life

much appreciated once again

Paul