My bios bin is not work if you have any one plz bios xps 17 9700 clere me region
-
Last edited by souaqi01; 06-20-2023, 04:28 PM. -
xps 17 9700 service tag:1WGC0B3,Motherboard: Sradale CMLH MB C31KJ$JA 18835-1
hello, I have a problem with this xps, the dell logo appears for a second, after which it enters the reboot loop. show image only the first time. I think it would be a bios problem. I found solderflux in the bios area, which I think has worked in that area before.
here is a original bios dump. The laptop is very new, I found editing tools, but I don't know how to use them...yetComment
-
Try a new oneComment
-
Good day
Please help rebuild this BIOS file
Unit comes on and displays DELL and stays there for a few seconds then screen goes off. The machine will still be on, keyboard back light will be on but with no display. When you switch it off it still and back on does the same thing.
Dell XPS 17 9700
S/N F82Q863
FAULT: STUCK ON DELL
CPU TYPE : i7-10750H
Comment
-
Hello try this file good luck
Comment
-
Hello, i buy Dell XPS 17 9700 with i7-10750h processor and has admin password on bios . I will use the 8FC8 patcher , but i cant find the bios chip on motherboard . Can someone help me to find location to chip ? I have two chips Winbond 25Q80DVNIG and one chip MXIC 25U8035F . Service tag : SD4T303Comment
-
Please clen bios xps 17 gn10 . st:FLQ303 . EX:34381276851
Comment
-
Hi everyone,
I am requesting help with a BIOS/ME Region issue on an ASUS laptop. I have followed the "BIOS guides, methods, resources and tools" provided in the forum, specifically trying to clean the ME Region and updating the BIOS region to version 413, but I haven't been able to succeed, i've tried to download a the same ME Region v11.0.0.1180_COR_LP_C_NPDM_PRD_RGN.bin but not able to fit it since it is bigger than the actual size from the ME region of my chip.
System Details:- Make: ASUS
- Full Model: F556UJ-XO015T (Mainboard X556UJ_MB REV 2.0)
- Serial
-
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
Edit: apologies, I only need help with the DMI info.. I thought the ME region would need attention in order to recover from bricked state but maybe I misunderstood.
Im a novice to this experience but in short, I performed a backlash from the latest and final bios firmware BHCN45WW to BHCN26WW hoping that would solve an issue with keyboard functionality failing after an update. Ended up hanging during flash process and then system would no longer POST on reboot.
USB recovery process didn't seem to take. So today I successfully managed to get the BIOS dump from my machine... -
Sorry for the long story. I have a Dell Latitude 5530 (i7) laptop (South Peak 15 MLK MB DDR4 203102-1 FK8VG$JA) with an admin BIOS password that I want to remove. Service Tag: HYKFPT3. Other than that the laptop worked OK.
I found a CH341A Black and went looking for the BIOS chip on the motherboard. After trying to read one chip that was a firmware chip but not the BIOS I think I found the BIOS chip labeled Winbond 25Q256JVEN. Altogether I think I found 4 different firmware chips in the laptop. The BIOS chip is a WSON8 6x8. I used the CH341A, NeoProgrammer, and a cheap pogo pin clip... -
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder...
Comment