-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
S/N:-019876411251
Thanks
Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
some one help me to unlock surface go 2 part number DA0Z93MBAE0 REV E
s\n 0B368F6222837H
Comment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Any donations to Badcaps are welcome. Become a Badcaps supporter >>>>> click this link to donate <<<<< Thank you to all the supporters. -- -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Hi please password for BIOS
Serial Number 020028204251Comment
-
Comment
-
Post the blocked one so we can unblock it...
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...l=ThisIsHowDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
i unlock bios now the touch on the right side does not work for me as in the picture
Comment
-
Model : Microsoft Surface Laptop go 2 LTE 1927
Issue : Bios Password
SN : 017950604351Comment
-
Can someone help me?Comment
-
not workComment
Thank u
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello Friends! Trying to dump bios bin for Microsoft Surface 3 to recover UEFI password but running into error when running FPTW64 in CMD in Administrator mode:
More Details:Code:fptw64.exe -bios -d dump.bin Intel (R) Flash Programming Tool Version: 13.0.37.1556 Failed to Initialize driver for accessing PCI device. Error 51: Could Not access PCI device. Error 51: Could not access PCI device. Error 64: Failed to initialize SPI interface. FPT Operation Failed.
1. I don't know the UEFI password, dumping bios to recover... -
Hi. I have a surface pro 8 1983 device with locked bios. Bios settings are disabled. I think DFCI is enabled. Can you help me solve the problem.Thanks.
Serial: 0F00AQL214601J... -
Hi sirs. please help
Dell Inspiron 5775 bios locked "Unlock Setup fail"
After generating the Password Recovery code, I go to the “Security” tab - “Locked Settings” - it says “Unlock Settings? I tried many wrong passwords and it shows an error to unlock settings [ Press any key ].
What I did:
I read the bios dump.
Downloaded the bios update to 1.6.0 from the official Dell website, extracted the dump from it, updated the bios, but the problem persisted. Please help me to solve the problem.... -
Recently I used the official Lenovo bios updater software on my ThinkBook 13s G3 ACN (20YA0005GE). The updating process failed and I got a black screen after powering the device. Of course I did not make an own backup before using the Lenovo bios updater.
I bought a CH341A programmer and was able to make a connection to the chip while it is still soldered on board. But I did not realise that the chip was a 16MB size and selected the wrong size (8Mbit / 1 MByte) before reading the content of my chip. So the dump I did before erasing the chip is only 1MByte big. I fear that I lost...
Comment