I HAVE thinkpafd l13 with error 2202 product name is invalid any help .how
use thinkpad maintenance utilities v1.1
use thinkpad maintenance utilities v1.1
-
-
Re: thinkpad L13 ERROR 2202
You`re entering the wrong model name
https://www.badcaps.net/forum/showth...02#post1130627
.
-
Info for error 2202 LenovoThinkPad models and type
Extract from ThinkPad Maintenance Utilities Configuration File
plnsrv.ini Version 1.01
Some information that may be useful
There must also be missing models, add them to the list if you know of any.
...Code:brand name 20B1=ThinkPad Edge E445 20B2=ThinkPad Edge E545 20BC=ThinkPad Edge E145 20BM=ThinkPad X140e 20BL=ThinkPad X140e 20A3=ThinkPad X230s 20AH=ThinkPad X230s 20AK=ThinkPad X240s 20AJ=ThinkPad X240s
-
Gooday
I have an Lenovo ThinkPad P15s gen2 that keeps giving me this error 2203
I have used the Lenovo Gold Key U1 Tool erased the eeprom and enter all the configs again but I still receive this error
I believe it to be an BIOS problem
I will Attach bios dump and some screen shots
Board number: HT4B0 /HP4B0 /HT5B1 /HT4B2 NM-D352 Rev 2.0
SN: PF-3R33ZC
Type Number: 20W7-S2L700... -
Hi All,
Hoping to get my final issue over the line.
Had to change my dead motherboard out, found the answers to my my other issues here to update the Serial number UUID etc using the LenovoUone tool here but I am still left with the error in the subject line.
when using the tool to update the eprom its seeking a hexadecimal code to update the product name. would anyone happen to know where I can source it?
thanks in advance.11-25-2024, 07:30 AM -
Hi all!
HISENSE 65E7KQ PRO
RSAG7.820.13512 - chassis
MT9618BAATAB - cpu
RSAG7.820.12059 - power
HD650Y3U77 - panel
KLM8G1GETF - emmc
The TV does not turn on, the standby indicator is on. All voltages are present.
Emms is dead. Not readable, not detected.
Replaced emmc.
But with another dump there is no launch
Terminal log
UART
<
AC_ON
RPMB key is not yet programmed
HASH1_VERSION=0x00000000 64bit
E-B
FDE enabled
layout pattern onebin by SAR7,0... -
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
Comment