Clean the ME firmware https://www.badcaps.net/forum/troubl...22#post1622422
-
-
Hello,
Please help me with endpoint security controller problem
HP Elitebook 840 G6
SN : 5CG9442CPM
Product ID :4WG30AV
ThanksComment
-
thank you very much my brother SMDFlea
for sharing information. I followed the instructions but it gives me the following message:Attached FilesComment
-
-
hello please help
please help with endpoint security controller problem on boot
hp elitebook 840 g6
ProdID 9JW45UC#UUF
sn# 5CG01GP73Comment
-
Try this patcher -> https://www.badcaps.net/forum/troubl...security-error
-
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Hello
I also need help whit endpoint error
serial 5CG0338SS1
840 g6Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Comment
-
Comment
-
hello
i send the wrong file about the endpoint problem
sorry for that
here is the good file
5CG0338SS1Comment
-
You still have an extra 1KB in your file, did you read this -> Your bios is 32,769KB and should be 32,768KB ,i suspect the extra code has been added because you chose an OTP chip, you should choose a non OTP chip then it won`t add any extra .
And did you try what peste linked to, the script patcher will patch it for you, if you follow the instructions.
https://www.badcaps.net/forum/troubl...26#post3589426
-
-
Hello smdflea
here the ec file for the endpoint error
5CG0338SS1Comment
-
Hi, I have a problem with my HP EliteDesk 705 G5 Small Form Factor computer on amd . Standard corrupted bios probably corrupted during the update. I have uploaded a clean dump from the manufacturer's website with the latest version but when I turn it on a message appears :
HP Endpoint Security Controller problem
there is a problem with the hp endpoint security controller on the unit
I tried restoring the bios security to factory defaults after the first switch-on because this helps with intel-based laptops. Here unfortunately this did not help. Does anyone have... -
Have a Samsung UN50NU7400 which shows a boot screen and a screen saver if left on long enough but no picture ?
Would a moving screen saver confirm that the panel is ok or it could still be a panel issue ? -
Hi,
I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on... -
Notebook HP ProBook 450 G8
ProdID 2K8L1LT#AC8
Mother: DAX8QAMB8D0 REV D
The device had bootloop issues. I reprogrammed the EC BIOS and the main BIOS, extracted from an HP 440 G8 with the same motherboard, and I was able to start the device. However, every time I turn it on, I get the error 'There is a problem with the HP Endpoint Security Controller in the unit.' I tried disabling several security options in the BIOS, but the error still appears. Additionally, when I attempt to update the BIOS, both BIOS chips get corrupted again....03-10-2025, 07:12 AM -
Hi! Please help with Endpoint Security Controller Problem, sending old not working dumps. Thankyou
and there is no soud after flashing new bios, may be have some solutions?
ProdID: 4YD62AV
SN: 2TK9500V8X...
Comment