HP 840 G6 Endpoint Security Controller reported on Boot Screen

[SMDFlea]

some display it will show up ......"Security End Point" Please help me with perfect bios with no complain

Thread merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread.

Read the post above yours and post 16, try to fix it yourself. If editing or using the script doesn`t work then clean the ME firmware.

[Ismail-U50]

Please help me repair my bios file, is not come up after power led blink white and orange and have try some file in the thread but not perfect enough some start after some time fan spin fast no image
some display it will show up ......"Security End Point" Please help me with perfect bios with no complain
In case u need my backup. He is it down attached with info
HP Elitebook 840 G6
Board Number :6050A3022501-MB-A01
S/N: 2TK9490LWF

[SMDFlea]

Hello, I have the same problem can someone please help
HP EliteBook 840 G6
SN: 5CG9463MW5

Try this patcher -> https://www.badcaps.net/forum/troubl...security-error

[Lovro25]

Hello, I have the same problem can someone please help
HP EliteBook 840 G6
SN: 5CG9463MW5

[arif3203]

Thanks master hoaca388 and Master Bios Cracker file working

[Bios Cracker]

Halo I have a Laptop that has a Endpoint Security Controller Problem.
Can it be removed?
HP 840 G6
SN: 5CG0278SL8

Try and update.

[hoaca388]

Halo I have a Laptop that has a Endpoint Security Controller Problem.
Can it be removed?
HP 840 G6
SN: 5CG0278SL8

Endpoint Security Controller Problem

[arif3203]

Halo I have a Laptop that has a Endpoint Security Controller Problem.
Can it be removed?
HP 840 G6
SN: 5CG0278SL8

[rickjansen01]

Hello Smdflea
it works thanks for the support

[SMDFlea]

Hello smdflea
here the ec file for the endpoint error
5CG0338SS1

Here. Your backup is 16,385KB and it should be 16,384KB , ive already mentioned that you might be choosing the wrong chip type OTP ! .If you open your 16,385KB backup with RCUnlocker it will fail as it needs the correct filesize

[rickjansen01]

Hello smdflea
here the ec file for the endpoint error
5CG0338SS1

[Bios Cracker]

Try this file....
Step 1. Flash EC + This Patch file. Then Boot blank or black display will appear.
Step 2. Flash Only Your Main Dump File.
Hope that will solve the endpoint error.

Yeah it was wrongly tag.

[SMDFlea]

post the other chip, the EC_Bios

[rickjansen01]

hello
smdflea
i try the patcher white no luck
So i ask you guys
Regards chris

[SMDFlea]

You still have an extra 1KB in your file, did you read this -> Your bios is 32,769KB and should be 32,768KB ,i suspect the extra code has been added because you chose an OTP chip, you should choose a non OTP chip then it won`t add any extra .

And did you try what peste linked to, the script patcher will patch it for you, if you follow the instructions.

https://www.badcaps.net/forum/troubl...26#post3589426

[rickjansen01]

hello
i send the wrong file about the endpoint problem
sorry for that
here is the good file
5CG0338SS1

[SMDFlea]

quoting peste ? ,i`m sure you meant to quote rickjansen01

[SMDFlea]

Hello
I also need help whit endpoint error
serial 5CG0338SS1
840 g6

Your bios is 32,769KB and should be 32,768KB ,i suspect the extra code has been added because you chose an OTP chip, you should choose a non OTP chip then it won`t add any extra .

[Bios Cracker]

read..
https://www.badcaps.net/forum/troubl...security-error

Try this file....
Step 1. Flash EC + This Patch file. Then Boot blank or black display will appear.
Step 2. Flash Only Your Main Dump File.
Hope that will solve the endpoint error.

[peste]

Hello
I also need help whit endpoint error
serial 5CG0338SS1
840 g6

read..
https://www.badcaps.net/forum/troubl...security-error