-
Hi,
I have a Laptop that has a Endpoint Security Controller Problem.
Can it be removed?
mb:6050A3022501-MB-A01
HP EliteBook 840 G6
Serial Number 5CG024188M
SKU Number 4WG26AV
Universally Unique Identifier (UUID)
5E1ACB53B764E31B9283E8FC1485A385
UUID (standard format)
53CB1A5E-64B7-1BE3-9283-E8FC1485A385
System Board CT Number
PHWHN00WBDU5KG
ME Firmware Version
12.0.94.2380
Feature Byte
3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAdUdpdqfAfPhKhkjhk8.BQ
Build ID
19WWCFBT601#SABE#DABE
This is my backup 32MB
-
HP Elitebook 840 G6 Endpoint Security Controller Problem
SN# 5CG0209D9L
PRID 7WZ86UT#ABALeave a comment:
-
Hello anybody pls help me with endpoint security controller problem
HP Elitebook 840 G6
SN #5CG033127VK
ProducID 7LL16LT#ABM
Thanks
Leave a comment:
-
Bios HP Elitebook 840 G6
Hi, I need help for HP Elitebook 840 G6 bios. I attached the Backup. I have try ohter download program and I have a message: there is a problem with the hp endpoint security controller*on*the*unit.
the motherboard number: CATALONI-6050A3022401-MB-A01 (A1)
https://*************?ui=2&ik=56cd41...id=f_licy4gx20Leave a comment:
-
Re: HP 840 G6 Endpoint Security Controller reported on Boot Screen
I solved the problem by program the files that I attach below. It was necessary to update the DMI in BIOS and the endpoint disappears for good. I would like to thank the colleague above for their willingness to help.Leave a comment:
-
-
HP 840 G6 Endpoint Security Controller reported on Boot Screen
Hi, can someone send or clear DMI information for me. I have problem from title, I tried many BIOS-es and no one make a deal. I was able to manage this problem in HP 640 g4, when i write dump with clear DMI and write it from case.
I upload my original dump.
-
not sure how it happened but after replacing the screen on a2251 macbook it:
fans turn on for a second or 2, turn off, apple logo shows, 5-10 seconds pass and then system cuts off then cycles
thermal camera shows these are getting quite hot although i'm not sure what do to.
i've tried internet restore, same thing, put the old screen back on, same thing. which i'm inclined to think i f'd this up somehow or another. or the part that was given is faulty and caused something to go wrong. but I want to believe it's someone not me, but i'm prepared to think i...07-15-2025, 09:17 PM -
Hi, I have a problem with my HP EliteDesk 705 G5 Small Form Factor computer on amd . Standard corrupted bios probably corrupted during the update. I have uploaded a clean dump from the manufacturer's website with the latest version but when I turn it on a message appears :
HP Endpoint Security Controller problem
there is a problem with the hp endpoint security controller on the unit
I tried restoring the bios security to factory defaults after the first switch-on because this helps with intel-based laptops. Here unfortunately this did not help. Does anyone have... -
Have a Samsung UN50NU7400 which shows a boot screen and a screen saver if left on long enough but no picture ?
Would a moving screen saver confirm that the panel is ok or it could still be a panel issue ? -
Hi,
I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on... -
Notebook HP ProBook 450 G8
ProdID 2K8L1LT#AC8
Mother: DAX8QAMB8D0 REV D
The device had bootloop issues. I reprogrammed the EC BIOS and the main BIOS, extracted from an HP 440 G8 with the same motherboard, and I was able to start the device. However, every time I turn it on, I get the error 'There is a problem with the HP Endpoint Security Controller in the unit.' I tried disabling several security options in the BIOS, but the error still appears. Additionally, when I attempt to update the BIOS, both BIOS chips get corrupted again....03-10-2025, 07:12 AM
Leave a comment: