HP 840 G6 Endpoint Security Controller reported on Boot Screen

[SMDFlea]

Post moved from 635 aero g7 topic..... don`t hijack other thread topics....

[ameesh.p]

Serial Number: 5CG9398YVT
Product #/SKU : 7WZ86UT#ABA
CT Number: PHWHN00WBCTC4S
Description: HP EliteBook 840 G6

thank you so much it is working good .

[noname2024]

NOT working . i uploded my not working bios file . this is the file working with my laptop its shownig security error can you please fix this bios file?

Serial Number: 5CG9398YVT
Product #/SKU : 7WZ86UT#ABA
CT Number: PHWHN00WBCTC4S
Description: HP EliteBook 840 G6

[ameesh.p]

i have HP ELITEBOOK 840 G6 CRESCENT-6050A3022501-MB-A01 bios problem i got new bios and reprogramed it but now showing HP ENDPOINT SECURITY CONTROLLER PROBLEM Can any one clear this
Model- Hp EliteBook 840 G6
product id - 8NV12UC#ABA
SN#-5CG0312NRQ
i upload the file working now with my computer it showing end point security.
thanks in advance

[ameesh.p]

try fix

NOT working . i uploded my not working bios file . this is the file working with my laptop its shownig security error can you please fix this bios file?

[noname2024]

i have HP ELITEBOOK 840 G6 CRESCENT-6050A3022501-MB-A01 bios problem i got new bios and reprogramed it but now showing HP ENDPOINT SECURITY CONTROLLER PROBLEM Can any one clear this
i uploded original two bios file
Model- Hp elitebook 840 G6
product id - 8NV12UC#ABA
SN#-5CG0312NRQ

Thanks in adwance

try fix

[ameesh.p]

i have HP ELITEBOOK 840 G6 CRESCENT-6050A3022501-MB-A01 bios problem i got new bios and reprogramed it but now showing HP ENDPOINT SECURITY CONTROLLER PROBLEM Can any one clear this
i uploded original two bios file
Model- Hp elitebook 840 G6
product id - 8NV12UC#ABA
SN#-5CG0312NRQ

Thanks in adwance

[peste]

I did not see any responds on that....why i re-post again.
please any help regard complain?

you got the answer above..stop posting everywhere..

[Ismail-U50]

I did not see any responds on that....why i re-post again.
please any help regard complain?

[SMDFlea]

some display it will show up ......"Security End Point" Please help me with perfect bios with no complain

Thread merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread.

Read the post above yours and post 16, try to fix it yourself. If editing or using the script doesn`t work then clean the ME firmware.

[Ismail-U50]

Please help me repair my bios file, is not come up after power led blink white and orange and have try some file in the thread but not perfect enough some start after some time fan spin fast no image
some display it will show up ......"Security End Point" Please help me with perfect bios with no complain
In case u need my backup. He is it down attached with info
HP Elitebook 840 G6
Board Number :6050A3022501-MB-A01
S/N: 2TK9490LWF

[SMDFlea]

Hello, I have the same problem can someone please help
HP EliteBook 840 G6
SN: 5CG9463MW5

Try this patcher -> https://www.badcaps.net/forum/troubl...security-error

[Lovro25]

Hello, I have the same problem can someone please help
HP EliteBook 840 G6
SN: 5CG9463MW5

[arif3203]

Thanks master hoaca388 and Master Bios Cracker file working

[Bios Cracker]

Halo I have a Laptop that has a Endpoint Security Controller Problem.
Can it be removed?
HP 840 G6
SN: 5CG0278SL8

Try and update.

[hoaca388]

Halo I have a Laptop that has a Endpoint Security Controller Problem.
Can it be removed?
HP 840 G6
SN: 5CG0278SL8

Endpoint Security Controller Problem

[arif3203]

Halo I have a Laptop that has a Endpoint Security Controller Problem.
Can it be removed?
HP 840 G6
SN: 5CG0278SL8

[rickjansen01]

Hello Smdflea
it works thanks for the support

[SMDFlea]

Hello smdflea
here the ec file for the endpoint error
5CG0338SS1

Here. Your backup is 16,385KB and it should be 16,384KB , ive already mentioned that you might be choosing the wrong chip type OTP ! .If you open your 16,385KB backup with RCUnlocker it will fail as it needs the correct filesize

[rickjansen01]

Hello smdflea
here the ec file for the endpoint error
5CG0338SS1