Hi, I need help removing the bios setup password from my HP ZBook Fury 15 G7
ProdID 9VS27AV
SN# CND1067D2W
ProdID 9VS27AV
SN# CND1067D2W
-
-
post the original contents of the bios chip..
you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
This seems scary to me, but I've been around a long time - have an A+ from back in the day, and I prefer this much more affordable option to paying for a new system board.
So my first question is - the Youtube video comments suggest I could use a soic8 clip and not have to remove the chip from the board. Something like this? https://a.co/d/dQwCX7t
I'm not sure if that's valid for my particular system, but I would prefer that - otherwise I need to purchase more equipment for removing and replacing the chip. I might need some helpful suggestions on the right tools for the job if that is the case - heat gun etc?. Also, do you know of a valid link for the software that I would need to read the chip? Seems the link in that video is dead. Thanks for your help!Comment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Bonjour
J'ai un model en atelier mais un ancien technicien a essayé d'enlever le bios mais je n'ais pas celui d'origine comment je peux faire pour rallumer le pc qui était bloquée par un mot de passe ?
Merci
Hello
I have a model in the workshop, but a previous technician tried to remove the BIOS, but I don't have the original one. How can I restart the PC that was locked by a password?
in English please..Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hi i have a HP ZBook Fury 15 G7 that has corrupted bios.
ProdID
SN# CND0212FXGComment
-
hi you have use juste number serial ? i have only Serial , BIOS 16MB corrupt and not have 32 you think is posible?
Originally posted by Kokopolokoks
Hi i have a HP ZBook Fury 15 G7 that has corrupted bios.
ProdID
SN# CND0212FXG
hi flash main 32 mbComment
-
Good morning
What you need to remove your laptop password:
ZBook Fury 15,6 (4N4Z7AV)
SN# CND2461FRHLast edited by IAB; 07-31-2025, 03:56 PM.Comment
-
NEED BIOS FOR HP ZBOOK FURY 15 G7
PROD ID : 28f75av
SN : CND10749JM
NEED BIOS 32MB AND 16MB .
Thanks
Comment
-
ZBook Fury 15 G7
sn CND1223SD5
PASSWORD BIOS REMOVEComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello,
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries... -
need clear me bios for hp zbook fury 17 g7
serial number CND1273QQ4... -
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....
Comment