HP ZBook Fury 15 G7
motherboard fpz50 la-j202p rev 1.0
laptop had password and i charged bios from post number2 (alfredposada) it working on laptop and password removed but i have delay 40sec to sart logo and torn on lcd ,
can you help me for thise case urgant
regards
HP ZBook Fury 15 G7
motherboard fpz50 la-j202p rev 1.0
laptop had password and i charged bios from post number2 (alfredposada) it working on laptop and password removed but i have delay 40sec to sart logo and torn on lcd ,
can you help me for thise case urgant
regards
The laptop serial number and full laptop model number should be on a sticker on the base cover. The motherboard model number will be silkscreened in white writing somewhere on the motherboard , maybe la-j202p or similar. The bios chip/chips are located somewhere on the motherboard, i don`t know where exactly. When you find the bios chip (possibly a GD25B256D WSON8) you will have to make a backup using an SPI programmer ( plus WSON8 pogo adapter if you can`t desolder the chip or solder wires) , then post that backup here .
The laptop serial number and full laptop model number should be on a sticker on the base cover. The motherboard model number will be silkscreened in white writing somewhere on the motherboard , maybe la-j202p or similar. The bios chip/chips are located somewhere on the motherboard, i don`t know where exactly. When you find the bios chip (possibly a GD25B256D WSON8) you will have to make a backup using an SPI programmer ( plus WSON8 pogo adapter if you can`t desolder the chip or solder wires) , then post that backup here .
The bios password cannot be decoded. The section that has the password will be edited out using a hex editor by one of our members. Then you program the file back to the chip.
Hello, I am very new to this. I have an HP ZBook Fury 15 G7, Serial #: CND1206P5J that has a Bios password that I need to reset. Please help
The bios chip/chips are located somewhere on the motherboard, i don`t know where exactly. When you find the bios chip (possibly a GD25B256D WSON8) you will have to make a backup using an SPI programmer ( plus WSON8 pogo adapter if you can`t desolder the chip or solder wires) , then post that backup here .
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment