Lenovo Ideapad 5 15ITL05 Bios File

[Jk KIM]

After Bios updated my laptop bricked ;(
Lenovo Ideapad 5 15ITL05,intel i5 , WINBOND W25Q64xV

I need Bios(.bin) file
all I have is a '.fd file' but I can write this using CH354A

Also in CH341A programmer, I can find 3 memory name (W25Q64BV, W25Q64CV, W25Q64FV). Why is this 3 and which one should I write??

Thank u for reading long writes.

Masters..... PLZ, help me.

[peste]

Re: Lenovo Ideapad 5 15ITL05 Bios File

After Bios updated my laptop bricked ;(
Lenovo Ideapad 5 15ITL05,intel i5 , WINBOND W25Q64xV

I need Bios(.bin) file
all I have is a '.fd file' but I can write this using CH354A

Also in CH341A programmer, I can find 3 memory name (W25Q64BV, W25Q64CV, W25Q64FV). Why is this 3 and which one should I write??

Thank u for reading long writes.

Masters..... PLZ, help me.

the one you find on the bios chip.. first post the original bios of the laptop here..

[Jk KIM]

Re: Lenovo Ideapad 5 15ITL05 Bios File

Thank u for your reply,
Is there any other model's bin file which can use....?

[peste]

Re: Lenovo Ideapad 5 15ITL05 Bios File

Thank u for your reply,
Is there any other model's bin file which can use....?

post the bios first so we can see it and someone will help you with a bios ok..

[Jk KIM]

Re: Lenovo Ideapad 5 15ITL05 Bios File

post the bios first so we can see it and someone will help you with a bios ok..

This file is my first backupfile before I do ROM Writing..
Thank u

[hardware1]

Re: Lenovo Ideapad 5 15ITL05 Bios File

This file is my first backupfile before I do ROM Writing..
Thank u

Your file size should be 8MB not 1MB!
Write your Device Serial Number.

[Jk KIM]

Re: Lenovo Ideapad 5 15ITL05 Bios File

Model name is IdeaPad5 15ITL05
S/N is PF2JN1EE

[hardware1]

Re: Lenovo Ideapad 5 15ITL05 Bios File

Model name is IdeaPad5 15ITL05
S/N is PF2JN1EE

According to your Serial Number, your device should contains 2 Bios Chips (8MB +16MB).
I will attach a Virgin Bios from Lenovo, but you need to backup your Chips before program them.
Note: this Bios doesn't contain your DMI data.

[zientas77]

Re: Lenovo Ideapad 5 15ITL05 Bios File



According to your Serial Number, your device should contains 2 Bios Chips (8MB +16MB).
I will attach a Virgin Bios from Lenovo, but you need to backup your Chips before program them.
Note: this Bios doesn't contain your DMI data.

It works! Thank You very much!

[hardware1]

It works! Thank You very much!

You're welcome.

[laptecperu]

Hi friends, could you help me? I have the same IdeaPad 5 laptop. I downloaded the file that contains two bin files, but I don't know which ones are the BIOS. On my mainboard, I see three BIOSes, but I don't know which two need to be read and written. Please help. Thanks in advance.

[peste]

Hi friends, could you help me? I have the same IdeaPad 5 laptop. I downloaded the file that contains two bin files, but I don't know which ones are the BIOS. On my mainboard, I see three BIOSes, but I don't know which two need to be read and written. Please help. Thanks in advance.

post S/N, full name and model, motherboard model, TYPE,etc.

post the contents of the bios chip even if it is corrupted..

[laptecperu]

post S/N, full name and model, motherboard model, TYPE,etc.

post the contents of the bios chip even if it is corrupted..

Please, I need a rebuild BIOS for an

Lenovo Ideapad 5-15ITL05 Laptop - Type 82FG
Mainboard: GS55JGS55K NM-D211 REV 1.0
serial: PF3MKDXN

The laptop turns on, there's no video, just the power LED. It turns on for a while, turns off, and then goes into that loop. I found three BIOS CHIP

1 8MB UB2

1 64MB UC703/UC704

1 128MB UC702

I don't know if I should flash them one by one or if I need a clean, modified BIOS with my region's settings. I downloaded a BIOS directly from Lenovo, but it's almost 27MB, but it comes in a single file. I hope you can help me. Thank you.

[peste]

Please, I need a rebuild BIOS for an

Lenovo Ideapad 5-15ITL05 Laptop - Type 82FG
Mainboard: GS55JGS55K NM-D211 REV 1.0
serial: PF3MKDXN

The laptop turns on, there's no video, just the power LED. It turns on for a while, turns off, and then goes into that loop. I found three BIOS CHIP

1 8MB UB2

1 64MB UC703/UC704

1 128MB UC702

I don't know if I should flash them one by one or if I need a clean, modified BIOS with my region's settings. I downloaded a BIOS directly from Lenovo, but it's almost 27MB, but it comes in a single file. I hope you can help me. Thank you.

bios extracted from Lenovo site update for ideapad 5-15ITL05
DMI 42E000 - 42FFFF in 16MB bios

[laptecperu]

thankyou very mucho, but no work Hi friend, I have already flashed both BIOS, but it remains the same, the power LED lights up, stays on for a few seconds, turns off and turns back on,,, I flashed it with a BIOS programmer and tweezers to read the chip without unsoldering,,, do you think it is better to program it by unsoldering the BIOS chip and then re-soldering it?

[peste]

thankyou very mucho, but no work Hi friend, I have already flashed both BIOS, but it remains the same, the power LED lights up, stays on for a few seconds, turns off and turns back on,,, I flashed it with a BIOS programmer and tweezers to read the chip without unsoldering,,, do you think it is better to program it by unsoldering the BIOS chip and then re-soldering it?

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...l=ThisIsHow

[laptecperu]

Ok friend, I understand, I have this socket from my programmer, with that I can program the unsoldered BIOS chip, I upload a photo of my socket

[peste]

Ok friend, I understand, I have this socket from my programmer, with that I can program the unsoldered BIOS chip, I upload a photo of my socket

ok...ok take the chip out of the board put it in the adapter and the adapter in the programmer...

[laptecperu]

Hello friend, good day, I unsoldered and flashed the 2 BIOS, but the laptop still doesn't turn on, only the power LED, the small BIOS UB2, is it also necessary to flash it?

[peste]

Hello friend, good day, I unsoldered and flashed the 2 BIOS, but the laptop still doesn't turn on, only the power LED, the small BIOS UB2, is it also necessary to flash it?

either you didn't write them correctly or the laptop has another problem...