I would say this is a no fix, but want to pick the brains of the veterans here.
All voltages present, already tried several BIOS bins. All voltages present when power button is pressed. All reset signals present. Unit does not post, but turns off after around 10-12 seconds.
Some interesting details:
1. Unit toggles from 7 & 12 mA when plugged in
2. Units goes up to 1.5A when turned on (10-12 secs)
3. Current toggles between 37mA & 42mA when it turns off.
4. Unit is on continuously ON w/ all voltages present when no RAM is present.
Thanks in advance!
All voltages present, already tried several BIOS bins. All voltages present when power button is pressed. All reset signals present. Unit does not post, but turns off after around 10-12 seconds.
Some interesting details:
1. Unit toggles from 7 & 12 mA when plugged in
2. Units goes up to 1.5A when turned on (10-12 secs)
3. Current toggles between 37mA & 42mA when it turns off.
4. Unit is on continuously ON w/ all voltages present when no RAM is present.
Thanks in advance!
Comment