nm-c711 motherboard which, after a few days of turning on and off by itself

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Arminio
    New Member
    • Dec 2022
    • 1
    • italia

    #1

    nm-c711 motherboard which, after a few days of turning on and off by itself

    Hi all, I'm new to the forum and need some help....
    I have a notebook with a gs44d/gs54d nm-c711 motherboard which, after a few days of turning on and off by itself, never turned on again. there seems to be no power.
    thank you
  • mcplslg123
    Badcaps Legend
    • Jun 2015
    • 7262
    • india

    #2
    Re: nm-c711 motherboard which, after a few days of turning on and off by itself

    Hmm, no information at all. You need to do some measurements so that we can understand the issue. Have you dis-assembled the laptop and taken the motherboard out?? Thats the first thing to do.

    If you are comfortable with measurements and have basic tools like multimeter,hot air gun, we can proceed.

    Comment

    Related Topics

    Collapse

    • glovecaps
      Asus ROG Strix Scar G533qm with a G733qm Motherboard, can I modify the Bios to accept G533 Bios
      by glovecaps
      Hello,

      I have a Asus ROG Strix Scar 15 (G533QM) that had a dead motherboard (Graphics card dead) and after trying to fix the motherboard with no success, I bit the bullet on a sale for a new motherboard. I ordered a motherboard for the 15 inch model which is the one that I have, and when the motherboard arrived it wasn't for a little while that I saw it was from the 17 inch model.

      My question is, can I update the Bios on this G733 motherboard to a G533 Bios.

      The reason for wanting to do this is that the keyboard isn't working as it should, and I think this...
      11-25-2024, 04:23 PM
    • Docus
      Legion Y540 17irh motherboard issue ( need help to know how to diagnose my motherboard)
      by Docus
      Hi everyone 😀,

      I'm here today to ask for help with repairing the motherboard of a Lenovo Legion Y540 17IRH.

      To give you some context, I'm passionate about computer repair so much so that I've invested in a lot of tools and started practicing on dead and old hardware. I've been learning how to solder and desolder components, mostly focusing on phone repairs.

      Recently, I bought a broken Lenovo Legion Y540 17IRH for just €150, and there are two main reasons why I made this purchase:
      1. I already own the exact same model, but its plastic chassis is badly damaged.
      ...
      06-10-2025, 04:24 PM
    • wrongpolarity
      Please Help. Hp 8460P Motherboard not turning on.
      by wrongpolarity
      Hi All,
      I have been struggling to repair a HP 8460P laptop. Motherboard does not turn on. I have traced the problem to what seems to be a missing signal KBC_PWR_ON causing Trip2 on IC 5006 (TPS51123) to be activated.

      The following components have been replaced but the problem remains.
      C5191
      C5192
      U50006

      Listed below are voltages appearing on U5006 when the Motherboard is supplied with power from a bench power supply for the first 15 seconds or so.

      Pin 1 (Trip1) = 0.65
      Pin 6 (Trip2) = 0.65
      Pin 8 (Vreg3) = 3.31
      Pin...
      04-24-2024, 10:16 PM
    • Öğretmen27
      Turning on and testing the power card without the motherboard
      by Öğretmen27
      I want to turn on and test the power card without the motherboard.
      I have 17IPS62 and 172IPS72 power supplies. Are the joins correct in the images below?
      If it is wrong, how should it be?
      Thank you.
      01-05-2025, 02:56 AM
    • netgearnetgear
      Asrock a320m-hdv motherboard not turning on
      by netgearnetgear
      Good day members,
      I have a asrock a320m-hdv motherboard that does not turn on. This weird thing is that it turns ON when I heat the motherboard in the vicinity of the m2 slot with a blow dryer. The there is a capacitor and resistor in parallel that has a voltage of 1.79v and 819mV on either ends. When I heat the board and it turns ON, the voltage is 1.79v and 803 mV. It turns OFF and ON normally if I wait a few minutes. On the other hand if I wait for an hour or more it does not turn ON anymore. I have to heat that area again and then it works. I noticed slight heat for example from my...
      01-04-2024, 08:37 PM
    • Loading...
    • No more items.
    Working...