This is located where the tweezers show, On the in-rush just before, I guess that's the low side mosfet?
Thanks!
Thanks!
Attached Files
-
Last edited by SMDFlea; 11-30-2022, 01:35 PM. -
Re: Please identify this component
See attached - appears to be 'J4' = Vishay diode. -
Re: Please identify this component
Thanks!!!Comment
-
I tried to use this method:
Testing an N-channel MOSFET:
Step 1: Discharge the Gate (turn off the MOSFET)
Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.
Step 2: Charge the Gate (turn on the MOSFET)
Now, place the red probe on the Gate (G) and the black probe on the...09-27-2024, 03:31 AM -
This mosfet is from surface 2 go and if i try power it on this is only component what is heating.cant find schematics to identify this mosfet so maybe someone can help?
Thanks... -
Hi Gentlemens,
Can any one please help identify this mosfet (power supply of CPU) from asus gaming laptop ? (ALA49EX)
one picture to show how it looks from bottom... -
Hello.
Have this HP 16-a0023nc DAG3JCMBCE0 that have burned mosfet on i think memory power. both memory modules shorted. after remove mosfets i measure 10ohm on that line which is low so after remove ic i have normal reading. But i cannot identify this ic. can... -
Hello
I have I Intel nuc D34010WYB with a blown power mosfet and i cant find a photo of what mosfet was there
is anyone know?
11-30-2023, 02:42 PM
Comment