hp 15-P202ne how to make UMA

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • salmanzeiad
    Senior Member
    • May 2016
    • 68
    • world
    #1

    hp 15-P202ne how to make UMA

    DAY16EMB8C0 REV C


    The problem is that it works, but no data appears on the screen, and I noticed that the screen lighting is working
    Attached Files
    Tags: None
    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india
      #2
      Re: hp 15-P202ne how to make UMA

      Just remove graphics coil.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Yehuda170
          ThinkPad P15s Gen 1, NM-C931 REV 1.0 touch screen replaced only works in UEFI menu
          by Yehuda170
          original screen was BOE NV156FHM-T07 with On-Cell Touch screen I²C

          replaced with what was in my stock, which is IVO R156NWF7 R2 which is also with On-Cell Touch screen I²C

          now touch screen works perfectly in UEFI BIOS menu & boot menu. but not working in OS, tried windows & linux too

          with original broken screen i can see in device manager touch screen in human interfaces

          but with the new screen it's not showing in device manager

          is it lenovo blocking it? is it driver missing?

          I²C is a headache
          07-14-2023, 01:29 AM
        • reformatt
          Macbook Air M2 A2681 Kernel panics after screen replacement
          by reformatt
          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
          07-31-2025, 08:37 PM
        • Ado02
          MacBook Pro A2159 - No Display / Works on External Screen
          by Ado02
          Hi,

          I am working on a MacBook that came in for a screen replacement. The MacBook powers on and works on the external screen. However, the screen stays black. The replacement screen made no difference. On further investigation, I found small amounts of corrosion.

          Please see the attached image.

          I ordered a refurbished logicboard, but the problem didn't go away with the old or replacement screen.

          Can anyone suggest where to go from here?...
          01-12-2023, 03:35 AM
        • pecman
          Aiwa Z-R700 Music System has very low power when switched on, dim lighting and nothing works
          by pecman
          I was given an Aiwa Z-R700 from the 1990s era to look at by someone who said the twin tape deck did not work. The whole unit unit powered up ok but there was nothing from the tape deck. I had a look and found all the belts broken, I replaced the belts and then put the tape deck back into place and it still does not work. Also when I now power up the unit all the lighting on the front is very dim and the cd player and the tuner as well as the tape deck do not work. I have checked all the connections and ribbon cables again, there are no burnt or swollen capacitors. Maybe there are capacitors on...
          08-05-2025, 10:10 AM
        • DqMagetz
          Acer Nitro 5 AN515-54. displays on the external monitor and works fine, the issue is NO display on the internal screen
          by DqMagetz
          Good day!
          I have a customer's laptop — Acer Nitro 5 AN515-54 (EH5VF - LA-H501P). It has a display on the external monitor and it's working fine, but the issue is NO display on the internal screen. I already replaced the eDP cable and checked the LCD connector pins.

          Here are the voltage readings:
          • Input – 19V (stable)
          • +LCDVDD – 3.3V briefly, then drops to 0V
          • EDP_HPD – 3.3V briefly, then drops to 0V
          • PCH_BKL_PWM – 2.2–5V briefly, then drops to 0V
          • EC BKOFF# – 1.8V briefly, then drops to 0V
          • PANEL_OD_EN – 0.3V

          Is it possible that the EC chip is corrupted or damag...
          2 Photos
          07-12-2025, 09:37 PM
        • Loading...
        • No more items.
        Working...