LA-E341P component identification

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • reformatt
    Badcaps Legend
    • Feb 2020
    • 1400
    • Australia

    #1

    LA-E341P component identification

    I'm working on a HP 11-AB X360 fitted with a LA-E341P motherboard. It powers on for about 3 secs and shuts off. No schematics for these boards.

    There's no 1.8V present on pin 8 of the BIOS IC - dead short to ground on this pin. Thermal camera shows that IC U4113 is getting hot. I removed it and the BIOS IC, but short is in the CPU unfortunately. Confirmed with voltage injection and thermal camera.

    Would like to know what this IC is though for future reference. Only thing on it 8353 128B. The bottom number is a batch number as it differs between boards.

    EDIT: It's a 25 pin 5x5 BGA IC. Everything I've found so far is in a different package.
    Attached Files
    Last edited by reformatt; 02-10-2022, 07:30 PM.

Related Topics

Collapse

  • DynaxSC
    Extreme High Current & Low Voltage Short Killer ??
    by DynaxSC
    Hi Folks

    I'm looking for a extreme high current short killer solution for a reasonable cost.

    I have an LGA1700 motherboard (ASUS PRIME Z790-P WiFi) where I exchanged the LGA socket already 3 times, and every time after the socket exchange I get a short of power supply lines VCORE (V variable) and VCCIN_AUX (1.8V).
    After taking off the socket, the shorts dissappear again.
    The soldermask on the socket is already partially demaged from the heat, so I have reconstructed the soldermask by manually painting the missing soldermask parts with a very small top of a...
    10-15-2024, 10:13 AM
  • NConstantinou
    19v rail short voltage injection help!
    by NConstantinou
    i HAVE AN HP MOBO WHICH HAS SHORT +VIN.
    THE SHORT APPEARS AFTER THER CURRENT SENSE RESISTOR.(REMOVED AND TESTED).

    I AM GETTING RESISTANCE TO GROUND 14 OHMS.

    I PLACED A JUMPER CABLE ON CURRENT SENSE RESISTOR AND I APPLIED 2V
    AND I INCREASE AMPS UPTO 0.86 SHOWNING CC ON PS FOR SHORT.
    I NOTICE PCH AEAR IS GETTING A LITTLE BIT WARM.
    I INCREASE AMPS TO 0.9 AND CC LIGHT ON PS WHEN OFF.

    ACCORDING TO PS SHORT CC LIGHT IS ON BETWEEN 0.27-0.86A

    WHY IS THIS!
    CAN SOMEONE EXPLAIN

    THANKS
    07-16-2022, 03:17 AM
  • Stephen
    MacBook Pro 14" A2442 Short on PPBUS_AON but no short present when injecting voltage!
    by Stephen
    I check PPBUS_AON and there is a short present on the line, the computer shows a short when testing for short to ground, so when I inject voltage into the line, I get 0AMPS so no short is showing up. I have replaced a blown cap on this board that exploded and tested for the short and it is now removed. Any suggestions? I tested voltage at the line when the fuses are connected and I am getting 1.2 Volts at the line.
    02-06-2025, 12:03 PM
  • Victor Moreira Silva
    Acer Nitro 5 LA-L181p power LED turns on by 5 secs (Short on PCH rail?)
    by Victor Moreira Silva
    Hello everyone,

    I'm trying to repair my old Acer Nitro 5 (AN517-54-55T5). I've already bought a new laptop, so this is more of a learning project. For the experience, with no high expectations of success.

    Well, my decice specs are the following:

    Model: Acer Nitro 5 AN517-54-55T5
    CPU: Intel Core i5-11400H
    GPU: NVIDIA GeForce GTX 1650
    Motherboard: GH51G LA-L181P Rev:1c

    The symptom:
    When pressing the power button, the power LED lights up for about 5 seconds and then turns off. Initially, the issue was intermittent: sometimes...
    05-26-2025, 10:49 AM
  • aaronkatrini
    Help me find the short circuit on this WORKING Nvidia GTX1650
    by aaronkatrini
    Hi all,

    Recently picked up this GTX1650 at a local flea market for a low price and wanted to use it on my secondary PC. I first tested the card and saw the fan spin for a split second and then nothing. Immediately I thought of a short circuit. Disassembled and found a shorted SMD capacitor, injected voltage into it (1V/4A) and two Mosfets got hot immediately (QN3103 & QN3107). Desoldered these Mosfets and the card turned back to life.

    Bought replacements from Aliexpress and replaced them afterwards. Tried the card but still the saw the fan spin for a split second...
    04-18-2024, 03:15 PM
  • Loading...
  • No more items.
Working...