Da0twsmb6e0 rev e NO POWER

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GfilipeZ
    Member
    • May 2021
    • 43
    • Portugal
    #1

    Da0twsmb6e0 rev e NO POWER

    Hi,

    I have an Avell Titanium B153 Max on my bench, with a DA0TWSMB6E0 REV E motherboard. Currently, the machine is not booting.

    First question, does this machine need a working battery to boot? Or just plug in the charger?

    I was measuring the main voltages and where I found the most failures was in the graphics processing part. However, I don't know if these tensions have to be present right from the beginning of the boot.

    When trying to boot, the Logic Board has a stabilized consumption of 0.06A. I cannot find any short circuit.

    Anyone who already has some experience with this Logic Board model?

    Best regards.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • privato89
      Nintendo Switch Oled HEG-001: Second-Stage Boot Failure
      by privato89
      Hello everyone,

      I'm facing an issue with a HEG-001 motherboard that is unable to complete the Second-Stage Boot. I'd like to start directly with my conclusion, which is the decision to replace the MAX77621AEWI chip, and understand if it could be a correct evaluation.

      Before I dive into the process that led me to this decision, I want to mention that I have a fully equipped lab where I can perform any kind of tests.

      Let's begin:

      Following some guides online, I tried to understand how the Boot phase of the Nintendo Switch works, and what are the...
      03-26-2024, 06:37 AM
    • Fam787
      HELP! A1398 Dead,
      by Fam787
      I bought a second hand Mid 2014 A1398 MacBook Pro when I lived in Australia. I'd bought it as a back-up machine because I had a Mid 2014 MacBook Pro, and realising it might one day fail, I wanted a backup machine because I don't like change.

      Two weeks after buying MBP2, the seller called me to check if everything was OK with the unit, which I thought was odd. At that stage I might have turned it on a couple of times, but I'd not used it when he'd called. Over the last few years I used the machine seldomly because my original mac has been pretty OK. Every 3-6 months I'd charge it...
      5 Photos
      12-27-2024, 05:19 PM
    • hinisa
      Xiaomi router freezes at boot after re-capping
      by hinisa
      I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

      When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

      After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



      Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...
      07-08-2023, 05:58 AM
    • Luke Anders
      Lenovo Legion 5 (15ACH6H/17ACH6H) - Does not boot into any OS
      by Luke Anders
      Hi everyone,

      A few details about the laptop itself:

      Name: Lenovo Legion 5
      Model: 15ACH6H (according to its back cover details) / 17ACH6H (according to the BIOS Menu)
      BIOS Version: GKCN60WW
      EC Version: GKEC65WW
      Serial Number: PF39AQ7Z
      Board Model: NM-D562 Rev 3.0
      RAM: 16GB Installed, DDR4 (brand new)
      NVME: 500GB NVME drive (brand new, installed Windows 10 onto it for testing purposes and tested on another laptop (a dell XPS) works perfectly fine and boots in)

      I bought this laptop recently from eBay as a faulty device....
      10-12-2024, 05:13 AM
    • NolesFan
      Samsung un82ru88000f - Boot loop sort of but can correct with taping of LVDS ribbon
      by NolesFan
      Hello all... TV started boot looping. Opened the back panel and tried to isolate the problem. Just PSB no boot loop. PSB and MB no boot loop. Plug in the LVDS from panel to MB and boot looping starts up. It doesnt matter of order that I plug the LVDS ribbons back in, only 1 and no boot loop but as soon as 2nd one plugs in boot looping. I then noticed a flicker on the screen when I was closing the clip on the harness to the LVDS. Shut the lights off so I can see better, and I noticed as i slowly close it, I will get a picture, but as soon as it clips in, I lose picture and booting happens. So I...
      2 Photos
      10-24-2024, 06:36 PM
    • Loading...
    • No more items.
    Working...