DAG7BJMB8C0 5V regulator chip

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dinneke
    Senior Member
    • Apr 2014
    • 154
    • Netherlands
    #1

    DAG7BJMB8C0 5V regulator chip

    Liquid damage, 5V rail shorted, RT3662AC removed and short is gone.

    5V regulator not working, also short at output, regulator is marked BACCDK its's a QFN20 package.

    Does anyone knows wich regulator it is?

    No schematic.....
    Tags: None
    • SMDFlea
      Super Moderator
      • Jan 2018
      • 20898
      • UK
      #2
      Re: DAG7BJMB8C0 5V regulator chip

      It could be a silergy SY8288CRAC - https://www.badcaps.net/forum/showpo...1&postcount=12

      See page 26 in the Quanta ZHP schematic - https://www.badcaps.net/forum/showthread.php?t=77302
      Last edited by SMDFlea; 05-26-2021, 10:48 AM.
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment

        • Dinneke
          Senior Member
          • Apr 2014
          • 154
          • Netherlands
          #3
          Re: DAG7BJMB8C0 5V regulator chip

          Thanks!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • acedogblast
              Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
              by acedogblast
              This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

              There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
              11-02-2024, 05:13 PM
            • DynaxSC
              ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
              by DynaxSC
              Hi

              I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
              The SPI chip is an Winbond 25Q256JWEQ model (1V8).
              The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
              The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

              I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
              08-04-2025, 12:20 PM
            • SMDFlea
              Common SPI bios chip programming Questions and Answers
              by SMDFlea
              Common SPI bios chip programming Questions and Answers
              ----------------------------------------------------------

              Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

              A: If you can`t read from it how do you expect to write to it ?.

              Q: Why is my bios chip unreadable ?.

              A: The programmer is faulty or has a worn or broken zif socket.

              The USB cable is frayed,connector pins worn or some other physical damage.

              Not enough amperage or voltage to power the programmer properly.

              Bad...
              09-02-2021, 04:40 PM
            • mferna14
              ASUS TP412F 3.3V Regulator chip gets very hot
              by mferna14
              Hi all., I am working an ASUS TP412F​., motherboard Model TP412FAC R: 2.0. The problem I am facing is the 3.3 buck converter (L8=7J RT6256BGQUF) gets very hot when 19v is applied through DC-in jack. I don't think Schematics or Boardview is availble for this model. The chip get so hot that I can't even take the voltages of the pins. I replaced the chip but the problem is still there, new chip even gets very hot. The input on pin 5, 19v is present. So I removed the Output coil & the chip & checked the voltages on the chip pads which are as below: Please view if any volts seem to be abnormal....
              07-09-2024, 11:57 AM
            • Troystain
              Help EZP2023+ updated chip database for w25q256jveq?
              by Troystain
              Hello, anyone here have updated ezp2023+ chip database in .dat file format.

              I need to add w25q256jveq chip but I do not know what data should I type.

              I'm using the ezp chip dabase editor posted from here https://www.badcaps.net/forum/troubl...ro-programmers

              The currenty unit model that I am trying to detect is HP elitebook 640 g9 which is currently locked on admin bios....
              11-25-2024, 12:53 AM
            • Loading...
            • No more items.
            Working...