DAG7BJMB8C0 5V regulator chip

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dinneke
    Senior Member
    • Apr 2014
    • 154
    • Netherlands
    #1

    DAG7BJMB8C0 5V regulator chip

    Liquid damage, 5V rail shorted, RT3662AC removed and short is gone.

    5V regulator not working, also short at output, regulator is marked BACCDK its's a QFN20 package.

    Does anyone knows wich regulator it is?

    No schematic.....
    Tags: None
    • SMDFlea
      Super Moderator
      • Jan 2018
      • 20695
      • UK
      #2
      Re: DAG7BJMB8C0 5V regulator chip

      It could be a silergy SY8288CRAC - https://www.badcaps.net/forum/showpo...1&postcount=12

      See page 26 in the Quanta ZHP schematic - https://www.badcaps.net/forum/showthread.php?t=77302
      Last edited by SMDFlea; 05-26-2021, 10:48 AM.
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment

        • Dinneke
          Senior Member
          • Apr 2014
          • 154
          • Netherlands
          #3
          Re: DAG7BJMB8C0 5V regulator chip

          Thanks!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • acedogblast
              Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
              by acedogblast
              This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

              There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
              11-02-2024, 05:13 PM
            • SMDFlea
              Common SPI bios chip programming Questions and Answers
              by SMDFlea
              Common SPI bios chip programming Questions and Answers
              ----------------------------------------------------------

              Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

              A: If you can`t read from it how do you expect to write to it ?.

              Q: Why is my bios chip unreadable ?.

              A: The programmer is faulty or has a worn or broken zif socket.

              The USB cable is frayed,connector pins worn or some other physical damage.

              Not enough amperage or voltage to power the programmer properly.

              Bad...
              09-02-2021, 04:40 PM
            • mferna14
              ASUS TP412F 3.3V Regulator chip gets very hot
              by mferna14
              Hi all., I am working an ASUS TP412F​., motherboard Model TP412FAC R: 2.0. The problem I am facing is the 3.3 buck converter (L8=7J RT6256BGQUF) gets very hot when 19v is applied through DC-in jack. I don't think Schematics or Boardview is availble for this model. The chip get so hot that I can't even take the voltages of the pins. I replaced the chip but the problem is still there, new chip even gets very hot. The input on pin 5, 19v is present. So I removed the Output coil & the chip & checked the voltages on the chip pads which are as below: Please view if any volts seem to be abnormal....
              07-09-2024, 11:57 AM
            • Troystain
              Help EZP2023+ updated chip database for w25q256jveq?
              by Troystain
              Hello, anyone here have updated ezp2023+ chip database in .dat file format.

              I need to add w25q256jveq chip but I do not know what data should I type.

              I'm using the ezp chip dabase editor posted from here https://www.badcaps.net/forum/troubl...ro-programmers

              The currenty unit model that I am trying to detect is HP elitebook 640 g9 which is currently locked on admin bios....
              11-25-2024, 12:53 AM
            • inck243
              Acer e15-e5-576g-5762 bricked. Bios chip won't interface in AsProgrammer.
              by inck243
              Thanks for any help. The board version is DAZAARMB6E0 REV: E. The bios chip is winbond 25Q64JVSIQ1736. W25Q64JV is not available in AsProgrammer -- only BV CV FV or FW_1.8c. The chip won't interface with asProgrammer and a CH341A. When I have this chip on the board, the laptop will not post but when I plug it in to power, the blue LED lights up, also the orange when the battery is connected. When I push the power on button, keyboard backlight turns on and the fan starts briefely then turns off. But I can't do anything to program this bios chip so I bought another one.

              The BIOS...
              07-25-2024, 09:17 AM
            • Loading...
            • No more items.
            Working...