Mother Board : Cedar_Intel_-MB 13269 1 FX3MC FX3MC REV A00
board is power on, but no display.
It get 340-360 mA after power ON.
When remove RAM 2 beeps come.
I checked all voltages.
There is no LCDVDD.
Then I checked U5201.No Enable voltage come to pin No 1, in U5201.
Also no signal to D5201.
So what is the problem?
What I need to check?
board is power on, but no display.
It get 340-360 mA after power ON.
When remove RAM 2 beeps come.
I checked all voltages.
There is no LCDVDD.
Then I checked U5201.No Enable voltage come to pin No 1, in U5201.
Also no signal to D5201.
So what is the problem?
What I need to check?
Comment