Alienware M18X R1 hdd connector - seller need

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ktmmotocross
    Boardkiller
    • Feb 2014
    • 3577
    • slovakia

    #1

    Alienware M18X R1 hdd connector - seller need

    Hello.
    Im in need of this hdd connector for Alienware M18x R1 LA-6571P

    its name in schematic is AMPHE_G25201021A4EU~D

    anybody knows where i can buy it?


    custommer lost brown plastic that hold the flex in connector

    i think i see it in older laptops where thicknes of laptop does not matter
    Attached Files
    Last edited by ktmmotocross; 04-04-2021, 01:08 AM.
  • ktmmotocross
    Boardkiller
    • Feb 2014
    • 3577
    • slovakia

    #2
    Re: Alienware M18X R1 hdd connector - seller need

    damn. it is nowhere to find it

    Comment

    Related Topics

    Collapse

    • myth77
      alienware connector replacement
      by myth77
      I have Alienware m15 R2 Compal EDQ51 LA-H351P with one of those connectors to a usb/power bords damaged behind repair (many pins missing...)
      I was looking on ebay and Ali and they are very expensive but i found that dell precision 7530.7540.... laptops have maybe the same connector but i am not sure...So anyone tried this replacement before?

      First link is to a connector original for alienware and second link is from dell precision laptops.

      https://www.ebay.com/itm/15565280194...dx0JPhZbnPYfBf...
      08-20-2023, 03:12 AM
    • Tomylee
      No LCD image after connector replacement – lifted components and damaged resistor (Nintendo Switch Lite HDH-CPU-02)
      by Tomylee
      Hi everyone,

      Sorry for the person who’s going to read all this !
      I'm on a Nintendo Switch Lite, motherboard HDH-CPU-02.

      While replacing the left joystick, I had to remove the motherboard to access the connector underneath. When I lifted the LCD connector latch, it broke (the plastic had become brittle over time), so I replaced the entire connector.

      During the desoldering of the LCD connector using hot air, three small components located just below the connector (likely 0402 capacitors) came off and remained stuck to the bottom of the...
      07-11-2025, 11:52 AM
    • 5mall5nail5
      Help identifying connector for ASUS 4090 Strix RGB LED connector
      by 5mall5nail5
      Hi All -

      I had replaced my ASUS 4090 Strix cooler with a waterblock and put the stock cooler on the shelf. Was moving it and snagged my sweater on the connector and pulled the wires out of the pins on the RGB connector. I tried to get them back on but its too small so I opened the stamped pins and tried to solder but its not a good repair and the wire broke on reinstallation.

      Looking to replace the connector on the cable side and get pins to crimp onto a new cable. Bought random JST and such but nothing is correct. Can anyone help identify the connector and possibly matching...
      05-04-2025, 07:47 AM
    • Bupi452
      Alienware m15 r5 Ryzen 9 5900hx RTX 3070 MB-DC in connector issue
      by Bupi452
      Hi, everybody
      Yesterday I was about to re-paste my laptop, when during the disassembly I noticed that the DC cable from DC plug to the mainboard looked discolored​ and after a bit of prying I found out why...
      I am looking for the socket on the mainboard does anyone have an idea where I could get one? I have already looked in the board drawing and found out the manufacturer (ACES_50493-01301-P01) but it does not seem to be available for purchase...
      does anyone an idea where I could get one?
      PS
      The cable has a part number and can be bought on EBAY but I did not find...
      01-08-2025, 11:51 PM
    • bussincaps
      MacBook Pro Mid-2014 A1398 Retina LED Controller Connector [First Repair (Disaster)]
      by bussincaps
      Hello All,

      tl;dr: minimal electronics experience and my first repair, lifted 8 pads off the laptop display LED controller board when attempting a connector replacement, options are attempting pad repair or jump wiring.

      Laptop Model: MacBook Pro 15 Mid-2014 Retina, A1398 MGXA2LL/A
      eDP Display: Samsung LSN154YL01-A02, assembly sold as Apple part 661-8310
      Soldering Equipment: Hakko FX-888D w/ T-18 tips (Chisel, Conical, Bevel types)

      I needed to replace the 30-pin I-PEX Cabline connector (labeled J8300 in the Apple 820-3662 mainboard schematics),...
      08-03-2023, 12:57 PM
    • Loading...
    • No more items.
    Working...