Mac Pro ASD 3S149 needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • electroelef
    Senior Member
    • Jun 2014
    • 57
    • United Kingdom

    #1

    Mac Pro ASD 3S149 needed

    Hi guys.
    Anyone being able to help with an ASD 3S149, please?
    I was sure I have it but can't find it.
    I have a Mac Pro 5.1 2012 which is booting very slowly no matter what.
    Tested with different trays and different SSD's. Internal boot and external boot as well.
    Still very slow.
    I would like to run an Apple Service Diagnose on it maybe it will throw a light on the cause.
    Many thanks

    PS: also a 3S159 would be useful for Mac Pro 6.1
    Last edited by electroelef; 01-30-2021, 01:16 PM.
  • electroelef
    Senior Member
    • Jun 2014
    • 57
    • United Kingdom

    #2
    Re: Mac Pro ASD 3S149 needed

    I found the 3S149. Still looking for 3S159.
    nobody? Please?

    Comment

    Related Topics

    Collapse

    • privato89
      Nintendo Switch Oled HEG-001: Second-Stage Boot Failure
      by privato89
      Hello everyone,

      I'm facing an issue with a HEG-001 motherboard that is unable to complete the Second-Stage Boot. I'd like to start directly with my conclusion, which is the decision to replace the MAX77621AEWI chip, and understand if it could be a correct evaluation.

      Before I dive into the process that led me to this decision, I want to mention that I have a fully equipped lab where I can perform any kind of tests.

      Let's begin:

      Following some guides online, I tried to understand how the Boot phase of the Nintendo Switch works, and what are the...
      03-26-2024, 06:37 AM
    • hinisa
      Xiaomi router freezes at boot after re-capping
      by hinisa
      I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

      When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

      After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



      Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...
      07-08-2023, 05:58 AM
    • Luke Anders
      Lenovo Legion 5 (15ACH6H/17ACH6H) - Does not boot into any OS
      by Luke Anders
      Hi everyone,

      A few details about the laptop itself:

      Name: Lenovo Legion 5
      Model: 15ACH6H (according to its back cover details) / 17ACH6H (according to the BIOS Menu)
      BIOS Version: GKCN60WW
      EC Version: GKEC65WW
      Serial Number: PF39AQ7Z
      Board Model: NM-D562 Rev 3.0
      RAM: 16GB Installed, DDR4 (brand new)
      NVME: 500GB NVME drive (brand new, installed Windows 10 onto it for testing purposes and tested on another laptop (a dell XPS) works perfectly fine and boots in)

      I bought this laptop recently from eBay as a faulty device....
      10-12-2024, 05:13 AM
    • Popalwali
      Asus Nexus 7 2012 (ME370T REV 2.4) Schematics needed
      by Popalwali
      Hello Everyone,

      I will be really grateful if someone shares schematics and if possible the boardview of the old Asus Nexus 7 (2012) Tablet. The motherboard is ME370T Rev. 2.4. Now I can find schematics for the Rev. 1.0 but I could not find the schematics for the Rev 2.4. I tried to look for similarities in the Rev. 1 but there are somethings missing, plus the board i have has nearly no component names printed on it which as a newbie makes pretty hard for me to locate things. Any assistance will be appreciated. Thank you.
      08-25-2024, 11:28 AM
    • Ancient1
      MacBook Pro 2012 A1398 : Battery BMS circuit repair OR can it boot WITHOUT a battery ?
      by Ancient1
      Hi
      I received such Laptop as junk. Opening it I saw a lot of whitish water residue , but no corrosion really ( few coils have small brown rust marks, no green copper ).
      I cleaned all thoroughly and interestingly , its the Battery BMS board that has the real corrosion spots.. under the protective clear Goo !!

      I want to try and power up the laptop

      Battery is swollen. But I don't want to buy a new battery right now , of course .

      I started work on the BMS by zooming in on green spots . 2 VIAs are filled with rusted copper goo - who knows...
      04-17-2024, 12:46 AM
    • Loading...
    • No more items.
    Working...