Lenovo Z50-70 problem with chgarging

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sopik78
    Badcaps Veteran
    • Nov 2013
    • 519
    • Czech Republic
    #1

    Lenovo Z50-70 problem with chgarging

    Dear friends,

    I have a problem with MB NM-A271 from Lenovo Z50-70, which can't charge.

    There are measured values on IC BQ737 on attached picture, I think there is no problem, but please check it with me. KBC changed for the new one, BIOS and EC flashed, BQ 737 changed as well to be sure, but still not charging at all and charging LED doesn't light up. EC_SMB_CA1 and EC_SMB_DA1 checked on battery and on KBC with osciloscope. Battery changed.

    Any advice what to check?

    Many thanks.
    Attached Files
    Tags: None
    • sopik78
      Badcaps Veteran
      • Nov 2013
      • 519
      • Czech Republic
      #2
      Re: Lenovo Z50-70 problem with chgarging

      Nobody

        Comment

        • Sephir0th
          Badcaps Legend
          • Oct 2020
          • 1289
          • Germany
          #3
          Re: Lenovo Z50-70 problem with chgarging

          1,89V on Highdrv, Lowdrv and Phase Looks Like These three Pins are shorted together (Mosfets or IC). Did you checked that?
          Last edited by Sephir0th; 01-24-2021, 05:01 PM.
          FairRepair on YouTube

            Comment

            • mcplslg123
              Badcaps Legend
              • Jun 2015
              • 7262
              • india
              #4
              Re: Lenovo Z50-70 problem with chgarging

              check pq309/311 and specially pq306 working or not.

                Comment

                • sopik78
                  Badcaps Veteran
                  • Nov 2013
                  • 519
                  • Czech Republic
                  #5
                  Re: Lenovo Z50-70 problem with chgarging

                  Sephir0th: no short together

                  mcplslg123:pq309/311 changed for sure and still the same. pq306 I can't find.

                    Comment

                    • sopik78
                      Badcaps Veteran
                      • Nov 2013
                      • 519
                      • Czech Republic
                      #6
                      Re: Lenovo Z50-70 problem with chgarging

                      No idea what to check?

                        Comment

                        • Sametbey
                          Badcaps Veteran
                          • Jan 2021
                          • 229
                          • Turkey
                          #7
                          Re: Lenovo Z50-70 problem with chgarging

                          The PU301 should be 19v on 20 pins and 3v on 5 pins. Check the PQ301, PQ302 and PQ303 mosfet. and check the DC_IN ADPTER_IN entry.
                          I'm not happy to be so strong. because it's not humanly

                            Comment

                            • sopik78
                              Badcaps Veteran
                              • Nov 2013
                              • 519
                              • Czech Republic
                              #8
                              Re: Lenovo Z50-70 problem with chgarging

                              Pin 20 VCC 19V
                              Pin 5 ACOK 0V is OK for BQ737
                              PQ301, PQ302 and PQ303 were changed for sure but with the same result

                                Comment

                                Previous template Next

                                Related Topics

                                Collapse
                                • ravi_1617
                                  Lenovo B540 ,Starting Problem
                                  by ravi_1617
                                  Hello !
                                  Model Lenovo B540
                                  Board Details 09244-1
                                  LA14 DIS MB
                                  48.4DMO4.01.1
                                  This Board has starting problem , when CMOS batter is removed ,it starts (turn ON) by itself fine, than if is short power switch once board turns OFF Fine.
                                  when connected CMOS dont start.
                                  3.3 volts present at power switch (it slight less 3.267-87) .there was slight liquid spill at around U53 (SL62872HR),when I clean that area . I mean when its little hot board warm , board starts few time ON and OFF by power switch
                                  One more thing i want to mention ( by mistake i started at...
                                  10-14-2025, 02:08 AM
                                • lucaszmn
                                  Summary of BIOS Whitelist Removal Problem Lenovo Thinkpad T560
                                  by lucaszmn

                                  Summary of BIOS Whitelist Removal Problem


                                  Problem:
                                  I am attempting to remove the WWAN card whitelist from my Lenovo ThinkPad T560.
                                  Initial Findings:
                                  • My current BIOS version is N1KET58W (1.45).
                                  • I have a CH341A programmer and have successfully created two full backups of my BIOS.
                                  • I have the ability to use command-line tools on a Linux machine.
                                  Troubleshooting Steps & Conclusions:
                                  • I attempted to use several automated and manual patching methods on my N1KET58W (1.45) BIOS, including using hex strings. These attempts all failed.
                                  • I concluded that the
                                  ...
                                  08-12-2025, 03:01 PM
                                • coasterghost
                                  Lenovo T14 Gen 2 Type 20XK Model 20XK0069US Odd Charging Issues
                                  by coasterghost
                                  For Badcaps Readers, Please note that I am hopefully going to present this same message to Lenovo to see if they have any insight to the matter as well and figured to share the entirety here for clarification. The System is out of warranty as it is but does have the option to have it extended.

                                  Model Information: T14 Gen 2 (Type 20XK, 20XL) Laptop (ThinkPad) - Type 20XK - Model 20XK0069US
                                  Board: T14 Gen 2 (Type 20XK, 20XL) - Type 20XK.

                                  System Hardware:
                                  Processor: AMD Ryzen 7 PRO 5850U
                                  Memory: 1x 16GB DDR4 3200 (Soldered on Board); 1x Crucial 32GB DDR4...
                                  09-08-2025, 10:46 PM
                                • s_specialist
                                  Lenovo E15 Gen 2 GE4B0 GE5B0 NM-D011 Rev 1.0 sometimes not opening problem
                                  by s_specialist
                                  Recently, I have started to encounter a problem with Lenovo E15 Gen 2 models not opening. When you try to open the device, it gives a warning sound and does not display an image, when you apply light pressure on the keyboard, the image appears and works for a while, when you turn it off and on, the same thing happens again. Bios was tried, RAM slots were cleaned and soldered to the legs, the problem still persists. There seems to be a problem with the onboard processors, but since Lenovos glue the processor firmly from the sides, the paths are very damaged when removing it. Has anyone encountered...
                                  07-07-2025, 11:47 AM
                                • perzyk23
                                  Lenovo T580 - LCD Panel problem - error 0288
                                  by perzyk23
                                  Good morning,
                                  I have a problem with Lenovo T580, which after error code 0288 suggests a problem with the display. I checked the display and it works on another laptop. I replaced the display cable with a new one. I programmed another BIOS (downloaded from this forum) and I still have the problem of a dead display - there is an image via HDMI, and the system does not detect the built-in LCD at all. The problem appears to be hardware. What can I check to confirm or disprove this? I found many threads on the Internet related to this problem 0288, but without specific solutions. Please advise....
                                  10-25-2024, 12:42 AM
                                • Loading...
                                • No more items.
                                Working...