Hp elite x2 1024 g1 power on problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • george_gpu
    Senior Member
    • Dec 2015
    • 77
    • greece

    #1

    Hp elite x2 1024 g1 power on problem

    Hi i have this laptop ,i have white light when i hook power adapter(type c) but when i push power on goes red.
    I have voltage on the board and in battery connector.
    I scan board with thermal camera and i notice u66610 is hot(32c)
    I have donor board Do i have to replace ?
    Attached Files
  • stingerchamp
    Badcaps Veteran
    • Sep 2020
    • 425
    • Pakistan

    #2
    Re: Hp elite x2 1024 g1 power on problem

    Clear image required

    Point with line or tweezers

    Comment

    • george_gpu
      Senior Member
      • Dec 2015
      • 77
      • greece

      #3
      Re: Hp elite x2 1024 g1 power on problem

      Good day
      Here is the chip
      Attached Files

      Comment

      • stingerchamp
        Badcaps Veteran
        • Sep 2020
        • 425
        • Pakistan

        #4
        Re: Hp elite x2 1024 g1 power on problem

        Replace it and the MOSFETs attached to it

        Comment

        • george_gpu
          Senior Member
          • Dec 2015
          • 77
          • greece

          #5
          Re: Hp elite x2 1024 g1 power on problem

          Thanks for your answer
          That model has many Power problems i think(Most with tps865982/u2900)
          Q66610 Near to it
          6978 -ga7017
          Can you tell me the 2 parts specs if i need to order it
          Last edited by george_gpu; 01-09-2021, 06:43 AM. Reason: Info

          Comment

          • george_gpu
            Senior Member
            • Dec 2015
            • 77
            • greece

            #6
            Re: Hp elite x2 1024 g1 power on problem

            No luck ,I replace both but issue Exist

            Comment

            • abusalza
              New Member
              • Mar 2021
              • 5
              • Indonesia

              #7
              Re: Hp elite x2 1024 g1 power on problem

              Originally posted by george_gpu
              Thanks for your answer
              That model has many Power problems i think(Most with tps865982/u2900)
              Q66610 Near to it
              6978 -ga7017
              Can you tell me the 2 parts specs if i need to order it
              hi. how'd you know exact number for those parts? do you have schematic for elite x2? can you share it? thanks in advance

              Comment

              Related Topics

              Collapse

              • Tynan Dill
                Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                by Tynan Dill
                I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                Upon bringing it home and plugging it up, it showed a standby light.

                I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                The screen seems to blackout and stay black, but with a flashlight I can see the display.

                With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                Assuming...
                11-22-2024, 01:46 PM
              • Destroyer-Br
                [HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH
                by Destroyer-Br
                [HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH

                Hi everyone,

                I'm working on an Acer Nitro 5 unit with the following specs:
                • Motherboard: LA-J871P Rev: 1B
                • Model: Acer AN515-55-59MT
                • S/N: NHQ7JAL00403906A973400
                • SNID: 03902728734

                Initial Issue


                The laptop initially presented graphic issues and driver failure (Code 43) for the GPU.

                After preventive maintenance (cleaning, thermal paste, etc.), it powered on normally. We disassembled it again to inspect the GPU, reassembled...
                04-17-2025, 08:18 PM
              • Dani_2024
                Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                by Dani_2024
                Hi and thanks in advance for any input you might provide!
                I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                10-28-2024, 05:06 PM
              • sam_sam_sam
                Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
                by sam_sam_sam
                I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

                This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

                After all of...
                07-13-2024, 08:14 PM
              • JDC
                (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                by JDC
                ONN 100012588
                Issue: No Power, Then Rebooting After Main Board Change

                Short answer: replace main board and power board
                Technical answer: replace main board and Q306 & Q307 on power board.

                Long answer:

                TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                07-15-2022, 07:39 AM
              • Loading...
              • No more items.
              Working...