HP 6560b Change MAC ADRESS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • outsider
    Senior Member
    • Apr 2014
    • 104
    • localhost

    #1

    HP 6560b Change MAC ADRESS

    I reprogramming BIOS on HP ProBook 6560B and now I need changed mac adress to original. How version NbDmiFit i need?
  • Bonzas
    Badcaps Veteran
    • Jan 2018
    • 472
    • Indonesia

    #2
    Re: HP 6560b Change MAC ADRESS

    what do you mean change mac address ?
    if you just need change mac address, you can do it from operating system that call mac changer. but if you want this board accept any wireless card, you need to remove whitelist wireless card. and it's not easy.

    Comment

    • outsider
      Senior Member
      • Apr 2014
      • 104
      • localhost

      #3
      Re: HP 6560b Change MAC ADRESS

      I mean changing the mac adress of the LAN adapter
      I programmed the BIOS with a dump from a other motherboard and now I would like to change the mac address to the original one as it was originally.

      Comment

      Related Topics

      Collapse

      • Document Archive
        HP ProBook 6560b 6000 Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP ProBook 6560b can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 6560b boardview and 6560b schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for HP ProBook 6560b is accurate,...
        09-06-2024, 05:27 AM
      • Verlengsnoer
        Bios splash/logo change
        by Verlengsnoer
        Hi all,

        at firs, i hope this is the right place to post my question.

        Im looking for a tool to change the bios logo.

        everyone knows when you turn on your laptop/pc you will see the manufacturer logo like lenovo, hp, dell...

        i know that HP has a build in option to change the splash logo.

        but i want to change the manufacturer logo to an own logo.

        I try'd Change Logo 5.0, but when i make a backup of an laptop and edit the logo and flash the editted version back on the laptop the logo diddnt change.
        ...
        10-28-2022, 09:52 AM
      • rustinjust
        Advice needed-Technika 32-207 works but sticks on channel,won’t change channels ok
        by rustinjust
        My tv will work for a while and change channels with the remote as it should but then it will stick on one channel only and work ok but it won't change channels. I have tried unplugging it for hours and whilst unplugged pressing the power button on the tv to reset it.

        The volume button on the remote still works but it just won't change channels once it decides to stick on one channel

        It has built in basic freeview tv here in the uk, I've tried doing an automatic search to reset the tv but nothing works.

        I have to turn the tv off and then on again with...
        09-28-2023, 12:23 PM
      • Syseng
        Lenovo P14s Gen 5 SVP unlock
        by Syseng
        This sums up discussion related to Lenovo P14s Gen5 in this thread. Credits go to Sbaro and especially Maxpower3. The locked dump is attached.

        The device is based on NM-F871 motherboard with Nuvoton NPCK397 series controller. The motherboard also contains three BIOS chips: two different Winbond chips for main BIOS and external EC flash, and also a Gigadevice chip which purpose I do not know. The password information is contained directly in controller and thus can be manipulated by reprogramming it, so reprogramming BIOS chips is technically not required, however you may wish to make...
        06-22-2025, 07:44 AM
      • TuanTongbadcaps
        Change CPU multiplier through BIOS editing
        by TuanTongbadcaps
        Is there a way to change the CPU multiplier through editing the laptop's BIOS. I have a Latitude 7300 using Intel core I7-8665U CPU which has default multiplier settings between x4.0-x48.0. The problem with the device is that as soon as Windows boots up, the processor temperature is always high (usually in the range of 97-100 degrees Celsius), the multiplier is in the range of x46.0 - x48.0 even though no applications enabled. On a desktop we can change many things related to core voltage, multiplier or base frequency. but on laptop models using U suffix processors this is not available. I would...
        07-22-2024, 07:57 PM
      • Loading...
      • No more items.
      Working...