Thanks alot for the well worded Beginner's Guidelines. This Forum is great!
-
-
Hi guys,
I try to save my thinkpad x1 yoga 7th gen
I would appreciate some support in getting a clean .bin to be able to write with programmer CH314a.
thank you in advanced.
Comment
-
Off topic. Post your request in the "Bios requests ONLY!" section. Use the forum search,look for an existing topic or start your own thread.Post your backup and laptop serial number etc,as per the rules https://www.badcaps.net/forum/troubl...before-postingComment
-
I have always been interested in fixing things, and through various forums on the Internet I have been increasing my knowledge more and more, although modest, I have managed to repair various notebook motherboards.
I have been buying defective notebooks here in my region, and many of them I have been successful in repairing them, thanks to my willpower and the knowledge and help I have received on forums like this one.
Sorry by my english, it's all through the translator.Comment
-
superComment
-
Thanks for the knowledgeComment
-
Thank You..
Comment
-
Thank youComment
-
Thank youComment
-
Thanks for the comments!!!Comment
-
Good rules !!
Can be applied to a lot of situation.
A short way is : use you brain 😂Comment
-
rComment
-
It's really helpful for beginners like me. ThanksComment
-
This is awesome, thank you!Comment
-
Hi everyone,
I am trying to fix a samsung washinmachine power supply main board.
I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
The power supply board reference is the following: DC41-00189a
I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel... -
This specification for the ALIENWARE Steam Machine R2 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Steam Machine R2 boardview and Steam Machine R2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-12-2024, 03:28 PM
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
I’m repairing a Dell Precision 3591 with board number 223092-1.
I need a full BIOS dump (W25Q16 and W25Q512 if available), clean and bootable.
The original chips could not back it up as i used 3,3v instead of 1.8v programmer which ,killed the chip
bought new empty chip
the reason was to remove the bios password
Any working dump (from working unit) will help
is there anyway to rebuild one from scratch?
Dell Precision 3591
motherboard 223092-1
st 75nbp54
is there boot guard in Dell Precision 3591 with board number 223092-1 , which stored...07-28-2025, 09:37 AM -
Hello my friends!
I have a question that I think you can answer and help me with!
I have a faulty main board from an led TV. And I found the same part number board and design but is from a 43" TV and I want to use it on a 65". On its stickers , all are the same except the wattage for the LEDs backlight, both state different watts and LED Voltages!
So I presume that the backlight inverter section from the replacement board has lower wattage then the original one, am I right?
My concern is that the board won't draw enough voltage to the bac...
Comment