DELL 3521 LA-9104P getting 5 volts on VIN SECTION instead 19 volt

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • qayyum786
    Badcaps Legend
    • Aug 2018
    • 1933
    • INDIA
    #1

    DELL 3521 LA-9104P getting 5 volts on VIN SECTION instead 19 volt

    Dell 3521 la-9104p getting 5 volts on vin section instead of 19 volt
    dell 3521 La-9104p getting 5 volts on VIN SECTION on the ACP ACN
    But when i remove IO getting 19 volt on VIN ( ACP ACN )
    what is the problem
    Without IO 19 volt is ok
    WITH IO getting 5 volt on VIN
    Last edited by piernov; 05-19-2020, 04:30 AM. Reason: remove bold
    Tags: None
    • lapfix
      Badcaps Legend
      • Mar 2020
      • 2724
      • my workshop
      #2
      Re: DELL 3521 LA-9104P getting 5 volts on VIN SECTION instead 19 volt

      What do you mean by ACP ACN ! why you remove IO !
      What's the voltages on PQ101 all pins

        Comment

        • qayyum786
          Badcaps Legend
          • Aug 2018
          • 1933
          • INDIA
          #3
          Re: DELL 3521 LA-9104P getting 5 volts on VIN SECTION instead 19 volt

          Thanks for your reply
          I got it
          CPU is short

            Comment

            Previous template Next

            Related Topics

            Collapse
            • sam_sam_sam
              1970 Metal Lathe Control Circuit blowing fuses on the 120 volt section failing meager test below 60 mega ohms
              by sam_sam_sam
              I was working on this machine yesterday and I now going to use an incandescent lights instead of a fuses to figure out what the issue is with it blowing control voltage rail but this not the only issue the coolant pump failed the meager test as well as the main motor as well this motor has 12 motor wire leads instead of the normal 9 wires

              This metal lathe has a weird motor setup it has a soft start motor with a โ€œYโ€ and a delta type of motor winding setup and it is not done in the motor pucker head enclosure it is with four different contactors wired in a configuration I have not...
              12-29-2024, 07:18 AM
            • piernov
              Reminder: rules and organization of this section
              by piernov
              Activity on this forum has been increasing steadily and the workload for the moderation team as well in order to keep the place clean, so please make an effort to keep it organized.
              I've been deleting more and more posts that make a mess, so take a minute before posting to make sure you make a proper request/offer.

              Reminder about the rules and the organization of the "Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals" section.

              This section and its subsections are about the following classes of devices:
              • Desktop computers
              • All-in-one
              ...
              03-31-2023, 06:17 AM
            • nabilgo
              dell 3521 la9104p
              by nabilgo
              hey all

              i have dell 3521 la9104p he work only on battery and when i remove the battery and try o turn it on with charger he work for 2 seconde...
              06-10-2021, 05:51 AM
            • gabri2211
              external hd Seagate, broken down the +12 volt and USB 3.0 SATA board
              by gabri2211
              Hi to all ๐Ÿ˜Ž
              I'm looking for any useful information to repair this interface (I have attached the image).
              On this board I read E3215-1215A_4D.
              This is the small plate inside the HD enclosure that allows to connect a 12 volt power supply, interface the disk with a USB 3.0 socket and is connected to the HD with the SATA connector.

              If any of you have found a burnt or short-circuited component in a circuit like mineโ€‹, if you have useful diagrams for the repair, or even better a description for the tests at the test points, I would be very grateful.
              in particular...
              1 Photo
              11-12-2024, 08:08 PM
            • piernov
              Reminder: rules and organization of this section
              by piernov
              Activity on this forum has been increasing steadily and the workload for the moderation team as well in order to keep the place clean, so please make an effort to keep it organized.
              I've been deleting more and more posts that make a mess, so take a minute before posting to make sure you make a proper request/offer.

              Reminder about the rules and the organization of the "Troubleshooting Laptops, Tablets, and Mobile Devices" section.

              This section and its subsections are about the following classes of devices:
              • Laptops
              • Phones
              • Tablets
              • Other mobile devices
              ...
              03-31-2023, 06:10 AM
            • Loading...
            • No more items.
            Working...