I everyone I have a 2011 macbook air 820-3023 it was giving giving 3 beeps and wont boot. I reset SMC and PRAM. nothing was working so I reflowed the ram chips. after reinstalling the board it powered up, screen came on and I got a chime then it powered off.
now it wont power on and I am getting a dim green light on charger. after cheacking the board Q5310 was getting hot. I replaced that but it still gets hot.
with Q5310 pulled pin's 4,5,6 are getting 16.6v pin 2 seems to be getting 0.6v
Resistors R5311, R5312 test good. C6905 also test's good. no short to ground on Q5310. Don't know were to go next.
Thanks
now it wont power on and I am getting a dim green light on charger. after cheacking the board Q5310 was getting hot. I replaced that but it still gets hot.
with Q5310 pulled pin's 4,5,6 are getting 16.6v pin 2 seems to be getting 0.6v
Resistors R5311, R5312 test good. C6905 also test's good. no short to ground on Q5310. Don't know were to go next.
Thanks
Comment