ASUS UX31 not work on battery

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DeniS182
    Badcaps Veteran
    • Jun 2014
    • 328
    • Slovakia
    #1

    ASUS UX31 not work on battery

    Hi all,
    I have problem with this laptop. Works normally on charger but not work with battery. Battery isn't detected in windows - new battery. Battery connector was damaged, I resolder all pins, but pins 4,5,6 aren't connected to PCB because of pads are lifted from board.. I mean my laptop should work on battery, other pins + and GND are ok, maybe there be problems with charging..

    After PQ8803 I have battery voltage, I tried replace charger IC BQ24725a. Still the same.Can someone help me with this? And have someone the Boardview? thanks.

    I attached measurement on charger IC with charger and battery connected.
    Attached Files
    Tags: None
    • piernov
      Super Moderator
      • Jan 2016
      • 4435
      • France
      #2
      Re: ASUS UX31 not work on battery

      Run jumper wires from the connector to the associated resistors.
      OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

        Comment

        • DeniS182
          Badcaps Veteran
          • Jun 2014
          • 328
          • Slovakia
          #3
          Re: ASUS UX31 not work on battery

          I can't find the resistors PR6000, PR6001, PR6002 do u have boardview?

            Comment

            • jasko_jacker
              Badcaps Legend
              • Oct 2014
              • 1137
              • italy
              #4
              Re: ASUS UX31 not work on battery

              What motherboard version ?
              The resistors you are searching are in bottom layer
              Attached Files
              Last edited by jasko_jacker; 07-25-2019, 01:38 PM.

                Comment

                • DeniS182
                  Badcaps Veteran
                  • Jun 2014
                  • 328
                  • Slovakia
                  #5
                  Re: ASUS UX31 not work on battery

                  jasko_jacker - version 2.0 as you attached. I found those resistors thanks.. and all works fine now. Thanks for answers.

                    Comment

                    • String2016
                      Badcaps Legend
                      • Nov 2015
                      • 2230
                      • philippines
                      #6
                      Re: ASUS UX31 not work on battery

                      Can you post the image you jump the resistor?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • mkdj
                          ASUS X571 no power : battery issue?
                          by mkdj
                          Hello everyone,

                          Mark and model: ASUS X571
                          Symptoms: not turning on. There is only the LED battery indicator working. The owner of the laptop told me this problem arrived one week after having changed the battery. He then managed to power on the laptop only once, and then it never powered on again.

                          Tests already made:
                          - Battery is charging when laptop is plugged in. The LED battery indicator turns white after a couple of hours of charge, indicating that battery is fully charged. However, laptop won't turn on anyway, with or without AC plug.
                          - I have removed...
                          07-14-2025, 09:16 AM
                        • Document Archive
                          ISL6257HRZ ISL6257HRZ-T Laptop Battery Charger Datasheet
                          by Document Archive
                          ISL6257HRZ ISL6257HRZ-T Laptop Battery Charger Datasheet

                          Highly Integrated Narrow VDC Battery Charger for Notebook Computers

                          The ISL6257HRZ ISL6257HRZ-T is a highly integrated battery charger controller
                          for Li-Ion/Li-Ion polymer batteries. ISL6257 is designed for
                          Narrow VDC applications where the system power source is
                          either the battery pack or the regulated output of the charger.
                          This makes the max voltage to the system equal to the max
                          battery voltage instead of the max adapter voltage. Operating
                          at lower system voltage can improve...
                          11-05-2024, 04:43 PM
                        • ktmmotocross
                          asus FX506LI display goes half black when charger is attached and when laptop start or in bios. on battery in windows work ok
                          by ktmmotocross
                          Have this weird problem with asus FX506LI thats display goes half black when charger is attached and from start untill u pout charger in and pull it out. then display like switch to other mode and works ok.
                          I try to shut sown nvidia gpu but it is still the same. there is no bios menu to power down nvidia card. it taped display so i want my options before i pull it out

                          Asus FX506LI-HN227T
                          SN-M4NRCX0S90516C...
                          01-02-2024, 11:23 AM
                        • sam_sam_sam
                          Bauer tool battery pack charging with a HERCULES charger modification
                          by sam_sam_sam
                          The Bauer power tool battery charger just has to many issues with the charger over heating because I several HERCULES Hercules battery chargers that are 3 amp charge and because they have gone on quite a few times over the years before they came out with the fan cooling battery charger I going to modify one so I can charge Bauer battery packs faster than the crape battery charger that they have

                          Here is how this modification is going to be done I taking a 1.5 amp hour battery enclosure and gutting it removing the battery cells and replacing some Ryobi 1.5 amp hour battery pack that...
                          05-06-2023, 12:17 PM
                        • sam_sam_sam
                          Milwaukee M18 HD12.0 (12 amp hour battery pack) unbalanced failure charger refusing
                          by sam_sam_sam
                          I have two Milwaukee 12 amp hours battery packs that have an issue with battery cells very unbalanced these are probably over 4 years old and been heavily used in the past but now get occasionally used heavily and when I went to use the grinder tool the battery lost battery battery power very quickly so I decided to open it up and found some battery cells voltage from 3.6 to 4.1 no wonder the battery charger was not fully charging them 3 out of 4 LEDs were on meaning that it was only 75% charged

                          So I have put them on the battery testing machine to drain each battery cell down to...
                          09-04-2022, 04:45 PM
                        • Loading...
                        • No more items.
                        Working...