Announcement

Collapse
No announcement yet.

Dell Laptop Dead.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dell Laptop Dead.

    SO I have a dead dell laptop that does not turn on. I also do not see any shorting when using DC power supply.

    The board does have 3 /5 ALways voltage . there is not voltage on PIN 8 of the Bios Chip though.

    Also I am attaching a pic and would like to know why I am getting 0 voltage on the other end of the resistor
    Attached Files
    Last edited by IamPritesh; 12-12-2018, 10:30 AM.

    #2
    Re: Dell Laptop Dead.

    Anybody please help

    Comment


      #3
      Re: Dell Laptop Dead.

      for me it's normal PQ903 N Channel Mosfet gate Voltage 5V S & D GND
      +B 19V with Voltage Dividers 20K &100K 3.64V OK to PQ903 Gate pass to conduct 19V to B+BIAS

      send the Schmatic to find out adsent of 3.3V in bios leg 8

      Comment


        #4
        Re: Dell Laptop Dead.

        Thanks. After giving some heat on the SIO Chip now the laptop starts but has no display and no post.( Schematic attached )
        Even after removing the Ram , there is no beep . The fan spins and two LEDS glow. The PCH also slightly warm.

        Where should I start now ? Any checkpoints please..
        Attached Files

        Comment


          #5
          Re: Dell Laptop Dead.

          Originally posted by IamPritesh View Post
          Thanks. After giving some heat on the SIO Chip now the laptop starts but has no display and no post.( Schematic attached )
          Even after removing the Ram , there is no beep . The fan spins and two LEDS glow. The PCH also slightly warm.

          Where should I start now ? Any checkpoints please..
          Check voltages on Vcore coils and Ram. Might be bios issue

          Comment


            #6
            Re: Dell Laptop Dead.

            test all gray coils for voltage
            PL700 +VCCGFXCORE
            PL701 VCCCORE
            PL900+VGA CORE
            PL600
            PJP300 JUMBER +0.75VS
            PJP303 JUMPER +1.5
            ect save your old bios and try to flash bios you have 2bios chips i think you have to flash PCH one

            Comment


              #7
              Re: Dell Laptop Dead.

              PL700 +VCCGFXCORE - No Volts
              PL701 VCCCORE - No volts
              PL900+VGA CORE - 0.14 Volts

              PL600 - 0 volts
              PJP300 JUMBER +0.75VS - 0.74 Volts
              PJP303 JUMPER +1.5 - 1.48 Volts

              Comment


                #8
                Re: Dell Laptop Dead.

                Any help friends ?

                Comment


                  #9
                  Re: Dell Laptop Dead.

                  test voltage pin 22 ISL95833 +5VS
                  PQ700 +B
                  PQ701 +B
                  test 5 mosfets for any short

                  PU600 PIN 12 +VALW


                  MOST PROB BIOS ISSU TRY TO FLASH BIOS

                  Comment

                  Working...
                  X