Re: Asus X555LD Rev. 3.1 no power
VCC means +3VA_EC?
VCC means +3VA_EC?
-
-
Re: Asus X555LD Rev. 3.1 no power
I am giving up on that Board and try to fix the ohne with the i3 or the other board with the I5Comment
-
Re: Asus X555LD Rev. 3.1 no power
Just put a heatgun on the KBC and put some force on the IC.
Board now works! Fan is spinning at full throttle because of broken contact and no screen on internal because of removed AX1121 controller, which I wanted to use for another board.
New controller is ordered and broken contact will be fixed when I am in the office again next year.
So the fault was a dead ITE 8585E controller.Comment
-
Re: Asus X555LD Rev. 3.1 no power
Congratulations,
I had told you to check pin connectivity. Now you can have happy holidays this year.Comment
-
Re: Asus X555LD Rev. 3.1 no power
Yes, u were right
Looking forward to repair the two remaining Problems and have a fully working laptop again))
Comment
-
Re: Asus X555LD Rev. 3.1 no power
AX1121 was also soldered to the board, it works
But original screen is defective, blown IC on board. With an other screen it works perfect.
Can I use a FHD screen or do I need a WHD screen like original one?
Original one is Innolux N156BGE-L31
Thanks in advanceComment
-
Re: Asus X555LD Rev. 3.1 no power
Screen was replaced with LG Phillips HD (1366x768) screen, device is working perfectly nowComment
-
Hi all,
TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!
I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!
A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi all!
I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅
I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
https://www.badcaps.net/forum/troubl...-hardware-devi... -
Hello, I have an issue with the motherboard. Specifically, it doesn't power on, more precisely, the POST initialization doesn't occur.
Let me start from the beginning, the motherboard suddenly stopped working one day. There are no beep signals from the speaker, and the debug LEDs are not lighting up. After inspecting it under a microscope and using thermal imaging, I didn't find anything that could be damaged.
After that, I began voltage measurements, in which I noticed the absence of VDDQ, VDDP, VTT, and VPP lines. Later, I checked if there is an EN state on these lines,... -
Hello, I have an asus Z97-A motherboard and it doesn't start which was working properly before, the problem isn't related by ram, ram slots or psu (I changed all and nothing work), the exact problem is when you switch it on , it starts and after 1 seconds (no boot or display picture) it's off and then on cycle continuously until you power it off from psu also it's responding to the power switch for turning it off if you keep pressing it 3 or 4 seconds (power button pin has 3.3v) , also when you start it with eatx 12v socket connected this is happening (power cycle also all voltages are resetting...
Comment