Macbook pro 17" A1297

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Eleways
    Senior Member
    • Oct 2014
    • 62
    • Italy
    #1

    Macbook pro 17" A1297

    Hi guys

    I've a problem on a Macbook 17". Same Gpu problem, i suppose. After some minutes of work the image on display move on left side, I've change the Gpu, same problem.

    Any idea? I'm thinking about video memory, but it's strange.

    thanks Luca
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • rounin
      MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
      by rounin
      Hi everyone,

      I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

      🛠 Original Issue
      The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
      Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

      I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

      ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
      04-19-2025, 01:18 AM
    • giove
      problem with keyboard macbook a1297
      by giove
      Hi, I have a macbook a1297 emc2414 motherboard 820-2914-B with password prompt on startup. I unmounted the bios chip and reprogrammed deleting everything after $SVS from the binary file. After reassembly it boots normally with the operating system. Unfortunately, probably by disassembling the motherboard, the keyboard no longer works.
      I have unplugged and plugged the connector several times but nothing to do not even the start button works. To start it I have to disconnect the battery and put the power supply connector. Is it possible that the keyboard broke? do you think replacing it works?...
      06-03-2023, 12:47 PM
    • psdavid65
      Macbook Air A1466 820-3437-B Booting Problem
      by psdavid65
      I received a 2013 Macbook Air A1466 820-3437-B motherboard with serial number C02L6GQ9FSV8 that came in WITHOUT a bios chip. I got a new bios chip and reprogrammed it. Macbook now powers on but doesn't boot the SSD. I've flashed a ton of bios but still same problem. Windows installation works with this Macbook but never a mac installation. Unfortunately, since I didn't receive this macbook with a bios chip, I don't have the original bios. What can I do now?...
      06-20-2024, 12:27 AM
    • Skrndelj
      Apple Macbook Air M1 A2337 Trackpad problem
      by Skrndelj
      Hello all,

      I am repairing a Macbook A2337 and i have a problem
      The Macbook is stuck in restore as someone before me tried a DFU restore and bricked the device, now i can't do a restore as AC2 throws error 1 which is related to the trackpad.
      When i turn on the device i get the trackpad click for a few moments and then nothing, i tried 7 trackpads and 7 trackpad flats, i know all 7 are functioning okay, especially one as i use it for testing and DFU restore.
      I inspected the whole board and everything seems fine.
      Can anyone help me as i didn't fiddle with trackpad...
      06-11-2024, 04:26 AM
    • sdogs
      Macbook Air 2020 A2179 820-01958 battery problem?
      by sdogs
      Hi everyone,
      I have a MacBook Air A2179 in my hands that had power problems (5V to the USB-C port intermittently).
      After a first inspection I could see that the D3302 protection IC was burnt out, so I replaced it but the problem was not solved, it seems like intermittent 5v input.
      I then replaced the two u3200s (CD3217B12ACE) and now I have stable 20 volts and the macbook has turned back on.
      Unfortunately I have a further problem, it works very slowly and the fan runs at maximum and if I disconnect the charger it turns off, it's as if the battery was disconnected.
      ...
      02-08-2024, 08:00 AM
    • Loading...
    • No more items.
    Working...