Hello, I have a Dell N5110 Intel version with Nvidia graphics and when it starts I get 3 beeps. Board model 48.4IE07.011. I started by changing RAM and CPU, nothing changed.
Then I tried to reprogram bios with a downloaded dump, again the same. Next try, I changed the IO chip, the same.
Last thing I did I open schematic and boardview and check all the voltages from the power sequence page, and they are all present.
Anything else I can try before I give up on the machine?
Then I tried to reprogram bios with a downloaded dump, again the same. Next try, I changed the IO chip, the same.
Last thing I did I open schematic and boardview and check all the voltages from the power sequence page, and they are all present.
Anything else I can try before I give up on the machine?
Comment