Macbook Pro 17" 2011 - no power

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Eleways
    Senior Member
    • Oct 2014
    • 62
    • Italy
    #1

    Macbook Pro 17" 2011 - no power

    Hi

    I've a macbook pro 17" that work only with not original power supply. If use an original power supply don't work and the green led blink just one time.
    With a third part power suppy, it work fine, charge the battery the power supply led become orange after green.

    I've tried many original power supply but no one works. I've changed magsafe without sucess.

    Any ideas?

    Many thanks
    Last edited by Eleways; 04-10-2018, 03:46 AM.
    Tags: None
    • tsai2018
      New Member
      • Apr 2018
      • 2
      • taiwan
      #2
      Re: Macbook Pro 17" 2011 - no power

      battery ok？

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          ORIGINAL POWER SUPPLY BOARD
          7 Photos
          11-22-2024, 01:46 PM
        • JimBanville
          Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
          by JimBanville
          The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
          Opened it up and discovered the power supply is making a faint clicking or ticking sound.
          I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
          I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
          09-13-2023, 07:21 AM
        • SarcasticOP
          General question about MacBook power rails for repair.
          by SarcasticOP
          I am looking at an A2337 and found this for the order of power rails and what they do. Can this be confirmed before I dive into hunting down power rails that do not exist or are not neccisary?
          • PPBUS_G3H (12.6V-12.8V)
            • This is the main power rail that supplies power to the entire system. Check this rail first, as it must be present for other power rails to work.
          • PP3V42_G3H (3.42V)
            • This power rail is derived from PPBUS_G3H and is used to power the SMC (System Management Controller) and other essential circuits. It should be present if PPBUS_G3H is working correctly.
          • PPVRTC_G3H (3.3V)
            • This
          ...
          12-12-2024, 05:50 PM
        • CMCM
          Russound CA4 Power Supply Repair
          by CMCM
          Hello Everybody,

          Trying to repair a power supply from a Russound CA4 Multizone Controller (picture attached)

          Russound no longer supports it but were kind enough to provide a schematic of the power supply (pdf attached).

          The outputs marked 12v and 20v are all measuring only 1v.

          The board is clicking, which I think means it is in something called hiccup mode when the flyback transformers switches because of an internal problem or something else on the board Overloading it.

          The capacitors physically look clean (no bludgesor leaks) and...
          07-03-2025, 01:12 PM
        • Andreas_de
          Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
          by Andreas_de
          Hello!

          i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
          Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

          Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
          ...
          2 Photos
          04-12-2025, 10:38 AM
        • Loading...
        • No more items.
        Working...