Hp G62 with power problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • emmanuelbill1988
    Senior Member
    • Mar 2017
    • 100
    • ghana
    #1

    Hp G62 with power problem

    Please my follow tech i have this Hp G62 with power issue,after making my checks i have 3.3v and 5v present on the board but it can't start when i press the power bottom,can anyone help me out with how to solve it?
    Board number is
    DA0AX1MB6E0
    REV:E
    Tnx in advance
    Tags: None
    • emmanuelbill1988
      Senior Member
      • Mar 2017
      • 100
      • ghana
      #2
      Re: Hp G62 with power problem

      After measuring all the PL this is what i had
      PL5/05.1v
      PL9/03.4v
      PL2/11.1v
      PL8/00.0v
      PL13/00.0v
      Please is it okay?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • theone111
          Problem with LG Plasma 60PM6700 - Random power downs
          by theone111
          I have an LG Plasma TV 60PM6700 for the past ~12 years.

          In the last ~3-4 months I have been having some issues.
          1. Problem: It started with random picture disappearing (sound still worked).
            Frequency: Happened about once a week.
            Solution: Had to turn off TV wait a few seconds before turning it on again.
          2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
            Frequency: Happened about once a week.
            Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
          3. Problem: TV shuts down
          ...
          1 Photo
          07-22-2024, 10:36 AM
        • Duranitron
          Asus x512dk rev 2.1 power on problem
          by Duranitron
          When I reflash again the bios of hoaca388 the unit powers on and the unit lives!!! Hooray!! All voltage in the coil 3.3v, 5v and 6.7v indicate charging are all present. including the cpu voltage , EEPROM and GPU voltage the unit is now alive, normal screen booting to windows and log in screen until I power it off. Then the unit never goes on even when pressing the power button in the keyboard.. Voltage reading 19v main , 3.3v VCC in IT8225E-128 and EEPROM VCC 0 volt and the charging voltage 0 volt.

          Try to trace the power switch button goin to the power switch IC PU8803 (APL3533AQBI-TRG)...
          11-26-2024, 10:22 PM
        • EazyBone
          LG OLED55C9PUA power problem
          by EazyBone
          Hello, trying to fix C9 55 inch. I have pulled the back and all looks completely normal with nothing burnt so far. This is first time attempting to fix a tv so any help is appreciated.

          Problem. I hit power button, red light on TV turns off and tries to turn on, no picture shows up and then shuts off. This occurred after house power turned on and off, not from a storm.

          I have tested the power going from power supply to main board, all 12v and 20 volt readings are proper when I hit power button.

          The power supply to t con is different story.
          This...
          06-23-2023, 07:43 AM
        • Dr.d
          Help please..Lenovo ideapad 5 14itl05 power and charging problem
          by Dr.d
          I have a lenovo ideapad 5 14itl05, board LA-K321P, That will only power up on Battery only, or with battery disconnected and power adapter only. If battery is connected and usb-c power plug connected. It only works on battery and will not charge. I can however force it to charge by connecting the battery from a disconnected state while the power USB c plug is powering the laptop.

          Additionally....to add to this strange situation. The usb-c power plug ONLY works to power the laptop on one side when inserted into the boards power usb c plug. If you rotate it 180 degrees, the board gets...
          04-05-2024, 11:48 AM
        • sam_sam_sam
          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
          by sam_sam_sam
          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
          03-31-2024, 02:12 PM
        • Loading...
        • No more items.
        Working...