Back lit Working Pictures NO ( Picture working only with Ex. Screen)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dlshad96
    Member
    • Apr 2016
    • 39
    • Us

    #1

    Back lit Working Pictures NO ( Picture working only with Ex. Screen)

    Hi Mates

    I have three Laptops backlit Working with internal Screen . But Data-Pictures-Images NON

    with external Screen both are fine

    i tried replace the chip of BIOS ,change the LED screen,DATA Cable, same problem .

    Thinkpad L530 15.6"

    Thinkpad E520

    Toshiba C660-LA-6842P

    I need your Help Guys

    Thank you in advance.
  • caspian
    Badcaps Legend
    • Oct 2015
    • 1589
    • Laptop

    #2
    Re: Back lit Working Pictures NO ( Picture working only with Ex. Screen)

    measure voltage on all pins of the screen connector on the mainboard, and report them here. Then, we can help.

    Comment

    • dlshad96
      Member
      • Apr 2016
      • 39
      • Us

      #3
      Re: Back lit Working Pictures NO ( Picture working only with Ex. Screen)

      Thank you for replay

      L530 is 40 pins

      1,8,9,10,11,12,13,14,15,16,17,17,18,19,22,23,24,25,26,27,28,28,30,31,32,33,34,37= 0V

      Pins 20 and 21 = 1.5, 1 V

      2,3,4,6,7,35,36 = 3.3V
      38,39,40 = 20V

      Comment

      • dlshad96
        Member
        • Apr 2016
        • 39
        • Us

        #4
        Re: Back lit Working Pictures NO ( Picture working only with Ex. Screen)

        if i dont press the power button ( tourn ON the the laptop ) only last 3 pins 40,39,38 = 20V others non

        Comment

        • alvin24705
          Member
          • Dec 2015
          • 16
          • Indonesia

          #5
          Re: Back lit Working Pictures NO ( Picture working only with Ex. Screen)

          Originally posted by dlshad96
          if i dont press the power button ( tourn ON the the laptop ) only last 3 pins 40,39,38 = 20V others non
          check signal BL_ON# (Backlight_ON signal)

          Comment

          • caspian
            Badcaps Legend
            • Oct 2015
            • 1589
            • Laptop

            #6
            Re: Back lit Working Pictures NO ( Picture working only with Ex. Screen)

            Unfortunately, I did not found the schematics file of L530.
            If you upload it here, it would be possible to have a better troubleshooting.
            according to your measurements, your laptop is not sending data to the internal screen.
            Probably the GPU or PCH is faulty. but I am not sure without schematics.

            Comment

            Related Topics

            Collapse

            • Tr0ll
              T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
              by Tr0ll
              Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

              The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

              Original T-con:
              Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

              First replacement T-con:

              I thought it might be t-con and ordered new t-con from china(supposedly tested)...
              10-07-2023, 07:48 PM
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • spice_disc
              Vizio TV M50-C1 reboot cycle and static on screen
              by spice_disc
              I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

              The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
              09-08-2024, 02:37 PM
            • PNI E.
              tcl u65x9006 back light on but no picture sounf ok after 40 50 secs
              by PNI E.
              hi guys, i need your help again...i have tcl u65x9006. while i was watching it become darker like when a movie ends, little by little the image disappear. now if i turn on i have back light on, after like 1 min i have also sound but no picuture. the back light is on i take off one at time the ldvs but nothing change always no picture. i tried to cover with a piece of paper the pin of ldvs i cover like 7 8 pins but nothing worked. the tv stay with no picture. there is a tcon board.i checked the voltage there on the fuse i have 11,8 volts. there is caps in shorts on the exit of the tcon i have...
              02-20-2025, 08:36 AM
            • Gabriel Lucas
              microsoft surface pro 5 touch screen not working
              by Gabriel Lucas
              Hello everyone, I bought a Microsoft Surface Pro 5 and the touch doesn't work. According to what the previous owner said, the screen stopped working after an update. The screen has no physical damage, and the touch works for 1 second when it turns on and then stops working. I've tried updating the drivers, formatting, and returning to factory defaults, but nothing worked. Can you help me?
              02-18-2025, 09:24 AM
            • Loading...
            • No more items.
            Working...