How can I convert hp g62 discrete to uma

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mcplslg123
    Badcaps Legend
    • Jun 2015
    • 7262
    • india

    #21
    Re: How can I convert hp g62 discrete to uma

    Originally posted by memoslar
    Hi, i have DAAX1JMB8C0 with the processor on board. Will it work? I tried except the seventh picture. But its not powers up.

    In 7th stage cant figure out the position of the capacitors.


    I have one difference in picture 2. I had 75 ohm resistors instead of 70 ohm in r497 , r498, r499
    Hi memoslar, Here is your answers:

    1) 7th stage pic-you need to put 470uF capacitor at PC132 and then make a jumper from PC132 positive to Q9 mosfet on pin1

    2) 75 or 70 ohm resistor hardly matters. You can use anything between 60-80 ohm. It will work.

    Boardview was already uploaded by me. Use that to locate components.

    Comment

    • zgredek44
      New Member
      • Jul 2018
      • 1
      • Poland

      #22
      Re: How can I convert hp g62 discrete to uma

      memoslar is it works for you ?

      Comment

      • mcplslg123
        Badcaps Legend
        • Jun 2015
        • 7262
        • india

        #23
        Re: How can I convert hp g62 discrete to uma

        Originally posted by zgredek44
        memoslar is it works for you ?
        It works dear as long as you do it correctly. 100% tested by me.

        Comment

        • memoslar
          Senior Member
          • Apr 2015
          • 122
          • Greece

          #24
          Re: How can I convert hp g62 discrete to uma

          Thank you very much ! it worked good!! God bless you

          Comment

          • razu
            Badcaps Veteran
            • Jan 2015
            • 218
            • Bangladesh

            #25
            Re: How can I convert hp g62 discrete to uma

            but today i cant remember this, how can i solve this i try to but cant remember .......sorry guys

            Comment

            • mcplslg123
              Badcaps Legend
              • Jun 2015
              • 7262
              • india

              #26
              Re: How can I convert hp g62 discrete to uma

              Originally posted by razu
              but today i cant remember this, how can i solve this i try to but cant remember .......sorry guys
              ????

              Comment

              • supun1992
                Member
                • Jun 2017
                • 13
                • Sri lanka

                #27
                Re: How can I convert hp g62 discrete to uma

                HP 634649-001 G62 -450sv how to CONVERSION Dis To Uma plz help ??
                Attached Files

                Comment

                • supun1992
                  Member
                  • Jun 2017
                  • 13
                  • Sri lanka

                  #28
                  Re: How can I convert hp g62 discrete to uma

                  Originally posted by mcplslg123
                  Hi memoslar, Here is your answers:

                  1) 7th stage pic-you need to put 470uF capacitor at PC132 and then make a jumper from PC132 positive to Q9 mosfet on pin1

                  2) 75 or 70 ohm resistor hardly matters. You can use anything between 60-80 ohm. It will work.

                  Boardview was already uploaded by me. Use that to locate components.
                  pc132 capacitor can't need.. plz help

                  Comment

                  • dreamer_x_x
                    Ottoman Empire
                    • Nov 2016
                    • 18
                    • turkey

                    #29
                    Re: How can I convert hp g62 discrete to uma

                    Originally posted by mcplslg123
                    Here is the conversion details+Boardview(without which its very difficult to locate components

                    Enjoy
                    i tried.it is working but no video on vga port and hdmi.my vga problem solved with schema.

                    thanks..

                    Comment

                    • Chieftain
                      Senior Member
                      • May 2016
                      • 73
                      • Greece

                      #30
                      Re: How can I convert hp g62 discrete to uma

                      Originally posted by memoslar
                      Hi, i have DAAX1JMB8C0 with the processor on board. Will it work? I tried except the seventh picture. But its not powers up.

                      In 7th stage cant figure out the position of the capacitors.


                      I have one difference in picture 2. I had 75 ohm resistors instead of 70 ohm in r497 , r498, r499
                      The DAAX1JMB8C0 with the processor on board has another simplier convertion.

                      Comment

                      • amir.nb
                        New Member
                        • Nov 2019
                        • 4
                        • iran

                        #31
                        Re: How can I convert hp g62 discrete to uma

                        hp g62 mb:pm_i_hpc_s mv_mb_v3
                        pj19 open
                        RI55 SHIFT RI51
                        RI53 SHIFT RI56

                        Comment

                        • Yehuda170
                          Member
                          • Jan 2015
                          • 34
                          • Israel

                          #32
                          Re: How can I convert hp g62 discrete to uma

                          Originally posted by Chieftain
                          The DAAX1JMB8C0 with the processor on board has another simplier convertion.
                          can you please share the simplier convertion for DAAX1JMB8C0

                          Comment

                          • teknikbursa
                            Senior Member
                            • Sep 2014
                            • 64
                            • turkey

                            #33
                            Re: How can I convert hp g62 discrete to uma

                            it is here

                            https://www.youtube.com/watch?v=PJMQ6ySvTrs

                            Comment

                            • Yehuda170
                              Member
                              • Jan 2015
                              • 34
                              • Israel

                              #34
                              Re: How can I convert hp g62 discrete to uma

                              Originally posted by teknikbursa
                              this is not the full guide, missing a lot of steps

                              Comment

                              • Leutzu
                                New Member
                                • Jul 2020
                                • 3
                                • Romania

                                #35
                                Re: How can I convert hp g62 discrete to uma

                                Do you have all the steps?
                                I've done the steps from YouTube, but no video.

                                Comment

                                • ilian359
                                  New Member
                                  • Dec 2015
                                  • 4
                                  • Bulgaria

                                  #36
                                  Re: How can I convert hp g62 discrete to uma

                                  Originally posted by mcplslg123
                                  Here is the conversion details+Boardview(without which its very difficult to locate components

                                  Enjoy
                                  This instruction is 100% bullshit.

                                  Comment

                                  • mcplslg123
                                    Badcaps Legend
                                    • Jun 2015
                                    • 7262
                                    • india

                                    #37
                                    Re: How can I convert hp g62 discrete to uma

                                    Originally posted by ilian359
                                    This instruction is 100% bullshit.
                                    Nope, perhaps your understanding of schematic diagram is. Have succesfully converted atleast 5-6 motherboards.

                                    Comment

                                    • gennacarogna
                                      Member
                                      • Oct 2021
                                      • 21
                                      • Italia

                                      #38
                                      Re: How can I convert hp g62 discrete to uma

                                      Originally posted by mcplslg123
                                      Here is the conversion details+Boardview(without which its very difficult to locate components

                                      Enjoy
                                      Hi, I saw those components to add, can I find them on a g62 motherboard with soldered cpu? Or can you tell me what the components to add are called?

                                      Comment

                                      • alijoon30
                                        Member
                                        • Sep 2017
                                        • 10
                                        • iran

                                        #39
                                        Re: How can I convert hp g62 discrete to uma

                                        thanxxx

                                        Comment

                                        • dinosglxaros
                                          Senior Member
                                          • Nov 2016
                                          • 55
                                          • greece

                                          #40
                                          Re: How can I convert hp g62 discrete to uma

                                          hello how do you solve the problem with vga and hdmi?

                                          Comment

                                          Related Topics

                                          Collapse

                                          • Sus256
                                            HISENSE 65E7KQ PRO - no boot
                                            by Sus256
                                            Hi all!

                                            HISENSE 65E7KQ PRO
                                            RSAG7.820.13512 - chassis
                                            MT9618BAATAB - cpu
                                            RSAG7.820.12059 - power
                                            HD650Y3U77 - panel
                                            KLM8G1GETF - emmc

                                            The TV does not turn on, the standby indicator is on. All voltages are present.
                                            Emms is dead. Not readable, not detected.
                                            Replaced emmc.
                                            But with another dump there is no launch

                                            Terminal log

                                            UART
                                            <
                                            AC_ON
                                            RPMB key is not yet programmed

                                            HASH1_VERSION=0x00000000 64bit
                                            E-B
                                            FDE enabled
                                            layout pattern onebin by SAR7,0...
                                            06-01-2025, 02:11 AM
                                          • glovecaps
                                            Asus ROG Strix Scar G533qm with a G733qm Motherboard, can I modify the Bios to accept G533 Bios
                                            by glovecaps
                                            Hello,

                                            I have a Asus ROG Strix Scar 15 (G533QM) that had a dead motherboard (Graphics card dead) and after trying to fix the motherboard with no success, I bit the bullet on a sale for a new motherboard. I ordered a motherboard for the 15 inch model which is the one that I have, and when the motherboard arrived it wasn't for a little while that I saw it was from the 17 inch model.

                                            My question is, can I update the Bios on this G733 motherboard to a G533 Bios.

                                            The reason for wanting to do this is that the keyboard isn't working as it should, and I think this...
                                            11-25-2024, 04:23 PM
                                          • Docus
                                            Legion Y540 17irh motherboard issue ( need help to know how to diagnose my motherboard)
                                            by Docus
                                            Hi everyone 😀,

                                            I'm here today to ask for help with repairing the motherboard of a Lenovo Legion Y540 17IRH.

                                            To give you some context, I'm passionate about computer repair so much so that I've invested in a lot of tools and started practicing on dead and old hardware. I've been learning how to solder and desolder components, mostly focusing on phone repairs.

                                            Recently, I bought a broken Lenovo Legion Y540 17IRH for just €150, and there are two main reasons why I made this purchase:
                                            1. I already own the exact same model, but its plastic chassis is badly damaged.
                                            ...
                                            06-10-2025, 04:24 PM
                                          • sahamipoor
                                            how to Set graphic Discrete mode motherboard(no UMA) Dell XPS L502x - DAGM6CMB8D0
                                            by sahamipoor
                                            hello...
                                            the Dell XPS L502x ( Model P11F ) [ DAGM6CMB8D0 rev.D ..3 of lines output LVDS from PCH has short ohm(0 -70) than LCD displat turn ON but is white !!!
                                            i decide to change LVDS ports to Lcd from EXT_LCD graphic Studio Discrete to No need it LVDS lines of PCH use...
                                            according to ُSchematic ,I changed any resistor and... Config_0 and Config_1 EC...but:
                                            1- EXT_LCD_PWM no voltage to enable pwm
                                            2-EXT_LVDS_VDDEN no High to Enable LCD_vcc
                                            and screen is turn off and fan is high Speed!!
                                            Question:
                                            I need to Use Discrete graphic nvidia EXT_LCD ports...
                                            03-12-2024, 02:51 AM
                                          • momaka
                                            ASUS P5GC-MX motherboard recap
                                            by momaka
                                            Here’s another motherboard that needed a full recap: an ASUS P5GC-MX.
                                            This one was gifted to me some years ago by user Pentium 4, along with a few other goodies. It actually came in working order with no bulging or leaking caps. However, I noted there were United Chemicon KZG caps everywhere on the motherboard. The CPU VRM output (CPU V_core) was the only exception: it had only 2x KZG. The rest was 6x UCC TMV 4V 680 uF caps… which aren’t any good news either.

                                            So here is what the motherboard looked like with its original caps:


                                            CPU VRM area up close…...
                                            01-27-2021, 11:59 PM
                                          • Loading...
                                          • No more items.
                                          Working...