inspiron 5010 when plugged the adaptor power on automatically and after few sec start 3 beeps
no display .... (cmos battery have 3.3 )
no display .... (cmos battery have 3.3 )
-
-
Re: Dell 5010 3 Beeps - Auto power when plugged in
For 3 Beeps shows following problems
*. chipset Error (North and South bridge error, DMA/IMR/Timer error)
*. Time-Of-Day Clock test failure
*. Gate A20 failure
*. Super I/O chip failure
*. Keyboard controller test failure
Check it -
Re: Dell 5010 3 Beeps - Auto power when plugged in
well i know that but i was hoping maybe someone have the same issue or help to find the problemComment
-
Re: Dell 5010 3 Beeps - Auto power when plugged in
any idea guys ???
i got another with same terms!
this time 7 beeps but still when plugged the adapter auto turn on!Comment
-
Re: Dell 5010 3 Beeps - Auto power when plugged in
check the SIO pins to discover which one is not correct.Comment
-
Re: Dell 5010 3 Beeps - Auto power when plugged in
Dell 3542 give 3 beep i programme bios laptop work fineComment
-
Re: Dell 5010 3 Beeps - Auto power when plugged in
bios have been programed and i change the i/o.... still the sameComment
-
Re: Dell 5010 3 Beeps - Auto power when plugged in
thank youComment
-
Re: Dell 5010 3 Beeps - Auto power when plugged in
hello brother i had same issue with dell 5010.
after checking little bit on board. i detect rt8205b is heating little bit.
so i replaced it with new one. and luckily it worked.Comment
-
Hi guys, can someone help me?
I have an issue with laptop dell latitude e5490 that auto restart when arrive at certain point in loading windows.
Board model is dm70 la-f401p rev:1.0 2017-09-20.
At first, the issue is sometime ssd sata 2.5 not detected. i already try another cable, at certain point, it ok using old cable (i mean sata cable here).
After a few days test, is seems ok.
Days later, another issue come, that is auto restart when certain point in loading windows. i already test another ssd, another ram, another sata ribbon, still same.... -
My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?
Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?
My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
I have tried multiple different Dell power adapters. My Dell... -
Hello,
i have similar problem as https://www.badcaps.net/forum/showthread.php?t=37828
QUOTED
-It works on charger (without battery connected-only charger)
-It works on battery (without charger connected-only battery)
-& it also works when plugged in battery & charger, but it's not charging the battery
//Confirming, i have same issue, but problem started from charger, centre PIN is outputing 10V+ and jumping randomly 19V
and..
QUOTE
The IC cannot maintain the input current level... -
Model: Dell Latitude 3440
Board id: DL340-HSW MB 13221-1 Rev: A00
Laptop produce 2 beeps. RAM is ok (replace and test). And i think RAM Slot is also ok. Board have 2 RAM Slots. All coils have voltage expect PL5101. DRAMRST has only 0.12V. BIOS flashing can't solve the problem. Need help.
PL4503 - 3.3V
PL4101 - 5V
PL4902 - 1.35V
PL4801 - 1V
PL4701 - 1.7V
PL4401 - 17V
PL5101 - 0V
PU5102 pins -
Pin 1 - not stable ( 0.5, 1.3, 5.9 etc ... )
Pin 2, 4 - 0V
Pin 3 - 0.95V
Pin 5 - 2.87V
Pin 6 -... -
Hello.
If you can help with this one please...The laptop does 8 beeps at boot which as I see is LCD error. The laptop shows image to external monitor normally. New screen flex and screen does not change anything.
So I took measurements in the LCD socket (LCD1):
DCBATOUT_LCD 19V
LCDVDD_LCD 3.3V
DBC_EN_R 0V
EDP_HPD_CONN 3.2V
LCD_TST_C 0V
EDP_AUX 3V
EDP_AUX# 0V
EDP_TX0# 0V
EDP_TX0 0V
EDP_TX1# 0V
EDP_TX1 0V
LCD_BRIGHTNESS 0V
BLON_OUT_C 0V
PANEL_SIZE_ID_CONN 0V
The ones that are 0v,...
Comment