Macbook pro A1226 GPU chip

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jasko_jacker
    Badcaps Legend
    • Oct 2014
    • 1140
    • italy
    #1

    Macbook pro A1226 GPU chip

    I would buy a bga chip for mac 820-2101-A 2007 but I don't know if it's GPU is at 128 or 64-bit. I did not know that the 884-602-A2 there were two models with the same identification number.

    http://www.ebay.it/itm/1x-New-GB4-60...s-BGA-Chip-09- / 272263477765? hash = item3f642afa05: g: CAAAAOSw9eVXUlPH

    http://www.ebay.it/itm/1x-New-G84602...item5d60834239 : g: ~ WEAAOSwYIhWjQIN

    I can't find the right schematic, the ones I've found have no dedicated video card.
    Attached Files
    Tags: None
    • dellxps15
      Badcaps Legend
      • Feb 2014
      • 1598
      • italy
      #2
      Re: Macbook pro A1226 GPU chip

      u need 128 bit otherwise it will use half memory available.

        Comment

        • jasko_jacker
          Badcaps Legend
          • Oct 2014
          • 1140
          • italy
          #3
          Re: Macbook pro A1226 GPU chip

          Thanks, I have some G84_602_A2 chips, you know how identify it ?
          Attached Files
          Last edited by jasko_jacker; 03-03-2017, 06:25 AM.

            Comment

            • ktmmotocross
              Boardkiller
              • Feb 2014
              • 3627
              • slovakia
              #4
              Re: Macbook pro A1226 GPU chip

              8xxx have only 1gb ram so both will work

                Comment

                • jasko_jacker
                  Badcaps Legend
                  • Oct 2014
                  • 1140
                  • italy
                  #5
                  Re: Macbook pro A1226 GPU chip

                  Originally posted by ktmmotocross
                  8xxx have only 1gb ram so both will work
                  Thanks

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • acedogblast
                      Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
                      by acedogblast
                      This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

                      There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
                      11-02-2024, 05:13 PM
                    • DynaxSC
                      ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
                      by DynaxSC
                      Hi

                      I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
                      The SPI chip is an Winbond 25Q256JWEQ model (1V8).
                      The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
                      The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

                      I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
                      08-04-2025, 12:20 PM
                    • Loki_Fido
                      Requesting help identifying chip in Macbook Pro A2485
                      by Loki_Fido
                      Hi ya folks,

                      I have this MacBook Pro A2485 (M1 Pro 2021) which came in for repair.

                      It had a shorted SSD power supply chip. Therefore it was stuck at 5V.
                      I replaced it and the SSD are fine. No more shorts.

                      But The mac still pulls 5V and 200mA. If i leave it alone for 5 mins, the mac manages to receive 20V and 40mA. Of course, which doesnt mean the mac starts after power meter reading 20V.

                      But while the mac is stuck at 5V, i checked the board with thermal and found this chip was trying to start. Chip picture is attached.
                      Chip marking...
                      08-07-2025, 10:17 PM
                    • SSBDADC234
                      MacBook Pro 14". The screen DP chip failed.
                      by SSBDADC234

                      When replacing the screen of this MacBook model, the DP855A chip must be moved from the existing screen for the screen to operate properly.
                      However, when I removed the DP855A chip from the existing screen, I must have done something wrong and the chip broke.
                      Testing the chip pins with a multimeter revealed a short circuit inside the chip.
                      Is it impossible to repair this? I couldn't find a programmer for this chip, nor any eeprom programmer software.​...
                      04-19-2024, 08:51 PM
                    • SMDFlea
                      Common SPI bios chip programming Questions and Answers
                      by SMDFlea
                      Common SPI bios chip programming Questions and Answers
                      ----------------------------------------------------------

                      Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

                      A: If you can`t read from it how do you expect to write to it ?.

                      Q: Why is my bios chip unreadable ?.

                      A: The programmer is faulty or has a worn or broken zif socket.

                      The USB cable is frayed,connector pins worn or some other physical damage.

                      Not enough amperage or voltage to power the programmer properly.

                      Bad...
                      09-02-2021, 04:40 PM
                    • Loading...
                    • No more items.
                    Working...