Programming Clip

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cyberhack
    Badcaps Veteran
    • Feb 2013
    • 466
    • Uk

    #1

    Programming Clip

    Any one know where i can get this clip
    Attached Files
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30919
    • Albion

    #2
    Re: Programming Clip

    what's the part number on it?

    Comment

    • cyberhack
      Badcaps Veteran
      • Feb 2013
      • 466
      • Uk

      #3
      Re: Programming Clip

      No part number only have the photo, i am using this for now
      ok found more info
      https://www.flashrom.org/Technology
      mor pictures
      Attached Files
      Last edited by cyberhack; 11-21-2016, 08:10 AM.

      Comment

      • diif
        Badcaps Legend
        • Feb 2014
        • 6978
        • England

        #4
        Re: Programming Clip

        http://siliconkit.com/ocart/index.ph...&product_id=81
        http://www.dediprog.com/pd/smt-sockets/SOK-SPI-8W

        Comment

        • cyberhack
          Badcaps Veteran
          • Feb 2013
          • 466
          • Uk

          #5
          Re: Programming Clip

          Great thanks placing the order now

          Comment

          Related Topics

          Collapse

          • langbaobao
            DIY 3D-Printer WSON8 Pogo Pin Adapter
            by langbaobao
            Hi.

            I'm posting this here in part as a memo to self as well as to describe the procedure I used in case anyone else found it useful. I found a lot of the necessary information to make this work on this forum and I figured I would give something back. If this is not the appropriate place to post this, I don't mind it being deleted but I hope it can help other people.

            I got an admin password locked HP Elitebook 840 G5 recently that I wanted to unlock. I'm a relative newcomer to reprogramming and unlocking firmware. The only previous experience I had was unlocking a BIOS...
            01-08-2024, 05:58 PM
          • Delicieuxz
            I replaced all electrolytics in subwoofer, still get a hum in speakers - audio clip
            by Delicieuxz
            I get a faint, low hum through my PC speakers, which connect to the subwoofer in a 2.1 speaker system. The hum drives me crazy and makes me stressed. When I turn off the subwoofer, everything is quiet and I start to relax, lol.

            Here's an audio clip of the sound coming from my speakers:

            https://vocaroo.com/16HaryHwTx78

            I recorded with my phone's mic right next to the speaker, and the mic picked up a lot of speaker noise over top of the hum. But I don't hear that noise in the room, I just hear the lower-pitched hum that's buried beneath all the other...
            11-15-2023, 09:50 PM
          • SMDFlea
            Common SPI bios chip programming Questions and Answers
            by SMDFlea
            Common SPI bios chip programming Questions and Answers
            ----------------------------------------------------------

            Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

            A: If you can`t read from it how do you expect to write to it ?.

            Q: Why is my bios chip unreadable ?.

            A: The programmer is faulty or has a worn or broken zif socket.

            The USB cable is frayed,connector pins worn or some other physical damage.

            Not enough amperage or voltage to power the programmer properly.

            Bad...
            09-02-2021, 04:40 PM
          • araxnido
            Programming KBC IT8987VG ASUS TUF FX506L RT809F+PEB
            by araxnido
            Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.

            When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
            06-10-2025, 09:26 PM
          • ChaosLegionnaire
            correct way to connect bare speaker wires into spring clip terminals?
            by ChaosLegionnaire
            i recently bought a logitech z607 surround system. however, its giving me grief. when i first connected it, it only had sound coming from the front right speaker. after a great deal of fiddling and reseating the speaker wires into the spring clip terminals, i finally had sound coming from all 5 satellite speakers.

            however, the sound still gets cut off intermittently if i move the speakers, subwoofer or move/touch the speaker wires on the back of the subwoofer. so i wanna ask what is the right way to connect bare speaker wires into spring clip terminals?

            i googled...
            10-27-2022, 06:19 AM
          • Loading...
          • No more items.
          Working...