Strange problem with Toshiba L775

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gurug
    Member
    • Mar 2015
    • 27
    • Slovenia

    #1

    Strange problem with Toshiba L775

    Diagnosis of my laptop power on problem:

    Laptop is working fine with only charger. Also is working fine only on battery, but if I connect battery and disconnect charger after it's powered off it will start again only from battery. Trying to connect charger at that time will result in dead computer, no lights, nothing. Then I must remove cmos battery to get it working again.

    I ordered new battery, but I'm afraid this won't do any good ...

    Could somebody share opinion, what could be the problem? Is it a battery problem? How could I diagnose it further?

    Thanks in advance!
  • bushie
    Senior Member
    • Dec 2013
    • 57
    • Romania

    #2
    Re: Strange problem with Toshiba L775

    Verify the mosfets around the charging controller, if one of them is shorted..., and also the charger ic can present problems...

    Comment

    • gurug
      Member
      • Mar 2015
      • 27
      • Slovenia

      #3
      Re: Strange problem with Toshiba L775

      Originally posted by bushie
      Verify the mosfets around the charging controller, if one of them is shorted..., and also the charger ic can present problems...
      I torn the laptop down again and checked mosfets, they all seems fine .. But interesting thing happened. I left laptop completely to dry out battery, and then suddenly started to work ok... until ... I took battery out and put it in again... is this bad battery symptom (I really hope so)?

      EDIT: Did not work for a second time ... when it worked battery was long time showing 99% in windows when charging. Left it to run out of juice ... and computer worked ... But now it was showing 23% in windows, left it again to run out of juice, and it did not work .. hm ...
      Last edited by gurug; 09-15-2016, 09:28 AM.

      Comment

      Related Topics

      Collapse

      • Document Archive
        ISL88739AHRZ ISL88739 Laptop Battery Charger Datasheet
        by Document Archive
        The ISL88739 & ISL88739AHRZ are a highly versatile combo battery charger
        configurable for operating as either a Hybrid Power Boost (HPB)
        charger or a Narrow VDC (NVDC) charger, supporting 2-, 3-, or
        4-cell batteries. Both configurations allow the battery to work with
        the adapter together to supply the system load when it exceeds
        the adapter capability, referred to as system Turbo mode. HPB
        charger configuration reverse-boosts battery energy to the system
        bus to help the adapter provide the system power in Turbo mode.
        NVDC charger configuration...
        11-05-2024, 03:28 PM
      • Document Archive
        ISL6257HRZ ISL6257HRZ-T Laptop Battery Charger Datasheet
        by Document Archive
        ISL6257HRZ ISL6257HRZ-T Laptop Battery Charger Datasheet

        Highly Integrated Narrow VDC Battery Charger for Notebook Computers

        The ISL6257HRZ ISL6257HRZ-T is a highly integrated battery charger controller
        for Li-Ion/Li-Ion polymer batteries. ISL6257 is designed for
        Narrow VDC applications where the system power source is
        either the battery pack or the regulated output of the charger.
        This makes the max voltage to the system equal to the max
        battery voltage instead of the max adapter voltage. Operating
        at lower system voltage can improve...
        11-05-2024, 04:43 PM
      • sam_sam_sam
        Bauer tool battery pack charging with a HERCULES charger modification
        by sam_sam_sam
        The Bauer power tool battery charger just has to many issues with the charger over heating because I several HERCULES Hercules battery chargers that are 3 amp charge and because they have gone on quite a few times over the years before they came out with the fan cooling battery charger I going to modify one so I can charge Bauer battery packs faster than the crape battery charger that they have

        Here is how this modification is going to be done I taking a 1.5 amp hour battery enclosure and gutting it removing the battery cells and replacing some Ryobi 1.5 amp hour battery pack that...
        05-06-2023, 12:17 PM
      • sam_sam_sam
        Milwaukee M18 HD12.0 (12 amp hour battery pack) unbalanced failure charger refusing
        by sam_sam_sam
        I have two Milwaukee 12 amp hours battery packs that have an issue with battery cells very unbalanced these are probably over 4 years old and been heavily used in the past but now get occasionally used heavily and when I went to use the grinder tool the battery lost battery battery power very quickly so I decided to open it up and found some battery cells voltage from 3.6 to 4.1 no wonder the battery charger was not fully charging them 3 out of 4 LEDs were on meaning that it was only 75% charged

        So I have put them on the battery testing machine to drain each battery cell down to...
        09-04-2022, 04:45 PM
      • Document Archive
        Texas Instruments bq24745 bq24745RHDR bq24745RHDT Battery Charger IC for Laptop Computers Datasheet
        by Document Archive
        The bq24745 bq24745RHDR bq24745RHDT is a high-efficiency, synchronous battery charger with an integrated input-current comparator, offering low component count for space-constrained, multi-chemistry battery-charging applications. The input-current, charge-current, and charge-voltage DACs allow very high regulation accuracies that can be easily programmed by the system power-management microcontroller using the SMBus interface. The bq24745 charges two, three, or four series Li+ cells, and is available in a 28-pin, 5-mm x 5 mm QFN package.

        The bq24745 features dynamic power management...
        10-23-2024, 02:50 AM
      • Loading...
      • No more items.
      Working...