HP Pavillon 17-f166nf boot loop

[piernov]

Hi,
As you can see on this video : https://youtu.be/XDtxhd0UFYM ; I have an HP Pavillon 17-f166nf which does not want to turn on.
After pressing power button, power LED turns on and fan starts to spin for a second, then it powers off, then again LED turns on and fan starts to spin.

Corrupt BIOS? Reflow needed? Something else?

I measure only 22 ohm on some caps under GPU. Is it dead?
Some caps under CPU shows around 70 ohm but I think it's alright.

Attached are some photos of the board, original BIOS backup, and schematics (may not be exactly the same but close enough).

[Pragmatiko]

Re: HP Pavillon 17-f166nf boot loop

Seem bios problem

[piernov]

Re: HP Pavillon 17-f166nf boot loop

Do you have a dump for this one?

[ridamouh159]

Re: HP Pavillon 17-f166nf boot loop

flasher avec ce fichier

[piernov]

Re: HP Pavillon 17-f166nf boot loop

Thanks but it still doesn't work… Nothing changed with your ROM.

[piernov]

Re: HP Pavillon 17-f166nf boot loop

Tried to remove PL12, PL13, then removed GPU as I was suspecting it. Nothing changed.
Removed PL14 just to see what would happen, and nothing changed either.
I've no other idea. Could it be a dead CPU/PCH? How can I test it? Anything else I can try?

[toufik sat]

Re: HP Pavillon 17-f166nf boot loop

Thank you so much work for me

[Nasir Raja]

Re: HP Pavillon 17-f166nf boot loop

Thanks I just download i will get back to you with updates mate thanks for sharing

[nasnus123]

Re: HP Pavillon 17-f166nf boot loop

Thanks its worked for me .
But power on message is" Manufacture Programming Mode is in Unlock mode"
and invalid Board sn/ model

[raihan]

Re: HP Pavillon 17-f166nf boot loop

Need uma bios

[Foul]

Working with 0227D.bin
thx !