macbook air 1502 not on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pravin6p
    Senior Member
    • Mar 2014
    • 75
    • india
    #1

    macbook air 1502 not on

    hi.. i have a mac air 1502 .
    its not powering on.
    i don't have another keyboard to check the power switch is there any way to power it on by shorting circuit.
    Tags: None
    • pravin6p
      Senior Member
      • Mar 2014
      • 75
      • india
      #2
      Re: macbook air 1502 not on

      does anyone have a schematic diagram.
      i managed to power it on but no display. the processor is getting little warm, with a core volt of 0.98v . fan not working.

        Comment

        • silica
          New Member
          • May 2013
          • 3
          • Spain
          #3
          Re: macbook air 1502 not on

          To start it you short the 2 pins on the picture.

          Regards
          Robert
          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • TechSplendid
              MacBook A2442 not powering on – suspecting CD3217, but replacement didn’t help
              by TechSplendid
              Hi All,

              I'm working on a MacBook Pro A2442 (14", 2021) that's not powering on. On two out of three USB-C ports, I get 5V and the current briefly ramps up to around 0.210A before dropping to 0.036A. On the third port (JF600), I only get 0.0045A and it stays there.

              Initially, I suspected a faulty CD3217 on that port, especially since I noticed signs of previous liquid damage near the JF600 USB connector. I replaced the CD3217 with an UF400 (from an A2442 donor board from the same location). According to the supplier, this should be a compatible version, but the behavior...
              04-09-2025, 02:13 AM
            • envym
              MacBook Pro 2018 with Activation Lock
              by envym
              Hi everyone!

              I have a 2018 MacBook Pro (with Sequoia OS) that I've been using for years with no problem. I recently received an M2 MacBook Pro so I'm mostly using it and not the 2018 one, but since a friend of mine needs a computer, I thought I could restore my 2018 and give it brand-new-like to my friend.

              I tried using the built-in tool to restore the MacBook (Settings > General > Transfer or restore > Delete) but it got stuck when trying to remove the Find Device configuration (it asked me for the password for my old Apple ID -now I use the same account but...
              06-27-2025, 08:54 AM
            • ErinV
              MacBook Pro A1989 820-00850-A not powering on
              by ErinV
              Hey everyone!

              I have a MacBook Pro A1989 with a 820-00850-A board that recently stopped working. I used it overnight to charge my phone, in the morning it didn't turn on, I assumed flat battery but now won't charge and doesn't start at all.

              I have fully dissassembled it, when disconnected the battery reads at 0.012V. Even with the battery disconnected the laptop doesn't boot.

              The diode voltages around all 4 CD3215's seem fine.

              For all CD3215 (UB300, UB400, U3100 and U3200) I read just above 5V on PP20V_USBC_TA_VBUS, 3.3V on PP3V3UPC_TA_LDO, 1.8V...
              09-30-2024, 10:21 PM
            • slimmy182
              MacBook M1 Pro 14" 2021 A2442 (820-02098) — U2020 getting hot, board not powering on
              by slimmy182
              Hi everyone,

              I have a MacBook Pro M1 14” (board 820-02098) with a broken LCD panel (matrix damaged).
              The board does not power on — when connected to power it draws about 5.1 V / 0.474 A (~2.45 W) and stays at that level, with no fan spin or display activity.
              Using a thermal camera, I noticed that U2020 heats up to over 70 °C shortly after connecting power.
              According to the schematic, U2020 is a SN74AVC2T45RSWR (Texas Instruments) 2-bit bidirectional level shifter.
              There are no visible signs of liquid damage anywhere on the board.
              Given the broken LCD,...
              3 Photos
              08-15-2025, 02:57 AM
            • Flasman90
              Macbook Pro DFU Restore Issues
              by Flasman90
              I have a 2020 Macbook Pro A2289 and after many attempts managed to get it into DFU mode, using my older 2017 A1706 Macbook Pro (Running Ventura 13.7.8). However, when attempting 'Restore', it fails at step 4 of 4, showing the following error:

              - "The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg (Generic error)) [AMRestoreErrorDomain – 0xA (10)]
              - "The system cannot be restored on this device. Failed to create new state machine for restore [com.apple.MobileDevice.MobileRestore - 0xFB1 (4017)]
              ...
              08-30-2025, 10:27 AM
            • Loading...
            • No more items.
            Working...