i am working on an Hp dv6 DA0R53MB6E1 QUANTA MOBO "R53" it returns power to dc jack when processor is inserted..I lifted one side of the inductor around the cpu core regulator...and power stays on but for sure it will not display. please Can any one help. I have attached the schematics
-
-
Re: Dv6 power problems quanta r53
It do the same on battery to?The Night Drop Down, I Will Keep Try Until..., You Never know.
Dushi Kòrsou, Nos Tei. -
Re: Dv6 power problems quanta r53
can you post a picture of the board?
do you got video chip? on diagram it say discrete.
did you do any reflow? notorious board with chips that goes bad.
reflashing the bios my help.
check for shorts on board on coils without CPU ONJust cook it! It's already broken.Comment
-
Re: Dv6 power problems quanta r53
"I lifted one side of the inductor around the cpu core regulator...and power stays on but for sure it will not display"
do u think that without power to cpu the image may come on?
Comment
-
Re: Dv6 power problems quanta r53
No!
no cpu no display!
did you find a short on the cpu line WITHOUT CPU?Just cook it! It's already broken.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi all!
I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅
I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
https://www.badcaps.net/forum/troubl...-hardware-devi... -
Hi all,
TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!
I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!
A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about... -
I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...09-06-2024, 05:59 AM
Comment