Sony vgn-cr313h mbx-177a power sequence required

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sanehdeep2012
    Senior Member
    • Oct 2013
    • 139
    • india

    #1

    Sony vgn-cr313h mbx-177a power sequence required

    DEAR FRIENDS I NEED POWER SEQUENCE FOR SONY GN-CR313H


    BOARD:
    DAGD1BMB8B0
    MBX-177A REV :B

    SCHEMATIC I HAVE


    There was shorting in charging board, that I have found that PC241 was short so put new one, but now no booting , so I need power sequence,

    help me o this topic


    thanks ain advance


  • sanehdeep2012
    Senior Member
    • Oct 2013
    • 139
    • india

    #2
    Re: Sony vgn-cr313h mbx-177a power sequence required

    firiend pl help i need it urgently

    Comment

    Related Topics

    Collapse

    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      11-22-2024, 01:46 PM
    • GLISIT
      Asus Probook P5440UF-XB74 power issue
      by GLISIT
      Hi all,

      TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


      I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

      A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
      01-16-2025, 02:29 PM
    • PopsCaps
      Sony Bravia KDL-40V2500 that will not power on
      by PopsCaps
      I have a Sony Bravia KDL-40V2500 that will not power on. The indicator flashes red 3 times.
      I do not hear any sound and I cannot see any backlight.
      I have tried disconnecting every cable on each board one at a time to see if anything changes.
      The only change is when I disconnect AC-DET cable on the Power Supply board or on the other end if I unplug the CN7009 connection on the B-Board and try to power on the TV the indicator will stay on solid green until I power off.
      My friend ordered another used power supply board but it is also doing the red indicator flash 3 times...
      03-25-2025, 11:23 AM
    • PantherDave
      Microsoft Surface Pro (5th gen) model 1796 - no power
      by PantherDave
      Hi all!

      I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

      I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
      https://www.badcaps.net/forum/troubl...-hardware-devi...
      05-29-2024, 02:01 PM
    • Andreas_de
      Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
      by Andreas_de
      Hello!

      i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
      Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

      Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
      ...
      04-12-2025, 10:38 AM
    • Loading...
    • No more items.
    Working...