I recently fixed my Toshiba A300 using 4x SMD Tantalum Capacitors 330uf 2.5v
and its still going great.
So I got out my other A300 and decided to do the same fix, WITH BIG PROBLEMS.
When I turn the Laptop on it fires up initially with only a black screen then about 20 seconds later it turns off. HELP
So I've taken the caps off, on the mother borad I tested the + & - with a meter and the ohms reading is 0.00, IS THIS NORMAL
What should I do now, I tested the caps the meter reading starts out with a low reading then rises to about 19.8 the decreases, IS THIS A GOOD SIGN?
PLEASE WHAT SHOULD I DO NOW?????
and its still going great.
So I got out my other A300 and decided to do the same fix, WITH BIG PROBLEMS.
When I turn the Laptop on it fires up initially with only a black screen then about 20 seconds later it turns off. HELP
So I've taken the caps off, on the mother borad I tested the + & - with a meter and the ohms reading is 0.00, IS THIS NORMAL
What should I do now, I tested the caps the meter reading starts out with a low reading then rises to about 19.8 the decreases, IS THIS A GOOD SIGN?
PLEASE WHAT SHOULD I DO NOW?????
Comment